The Control for HDMI function does not work.
- Check the HDMI connection between the connected devices and the receiver (refer to the supplied Startup Guide).
- Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of the TV.
- Wait for a while, and then try again. If you unplug the receiver, it will take a while before the operation is completed. Wait for 60 seconds or longer, and then try again.
- If you unplug the HDMI cable or change the connection of a device, enable the Control for HDMI function on the device.
- Make sure your TV is connected to the HDMI OUT A jack of the receiver.
- Make sure the HDMI output setting is set to [HDMI A] or [HDMI A + B].
- Set [Control for HDMI] to [On] in the [HDMI Settings] menu.
- Make sure the connected device supports the Control for HDMI function.
- Enable the Control for HDMI function on the connected device. For details, refer to the operating instructions of the connected device.
- The types and number of devices that can be controlled by the Control for HDMI function are restricted by the HDMI CEC standard as follows:
- Recording devices (Blu-ray Disc recorders, DVD recorders, etc.): up to 3 devices
- Playback devices (Blu-ray Disc players, DVD players, game consoles, video and audio streaming devices, etc.): up to 3 devices
- Tuner-related devices: up to 4 devices (used one by this receiver)
- Audio system (receiver, amplifier, headphones, etc.): up to 1 device (used by this receiver)
- When [HDMI OUT B Mode] is set to [Zone2], the Control for HDMI function does not work.
