Setting the height speaker terminals assignment (Height1 Speaker Assign/Height2 Speaker Assign/Height3 Speaker Assign)

You can set the assignment for the following height speaker terminals.

  • SPEAKERS HEIGHT 1 (ZONE 2) terminals (for STR-AZ3000ES)
  • SPEAKERS HEIGHT 2 (ZONE 2/CENTER 2 (R ONLY)) terminals (for STR-AZ5000ES)
  • SPEAKERS HEIGHT 3 (FRONT WIDE/ZONE 2/CENTER 2 (R ONLY)) terminals (for STR-AZ7000ES)
  1. Select [Setup] - [Speaker Settings] from the home menu.
  2. Select [Manual Speaker Settings].
  3. Select [Height1 Speaker Assign] (*1), [Height2 Speaker Assign] (*2), or[Height3 Speaker Assign] (*3).

    *1 for STR-AZ3000ES

    *2 for STR-AZ5000ES

    *3 for STR-AZ7000ES

  4. Select either of the following settings.

    Height1 Speaker Assign (for STR-AZ3000ES)

    • Zone2: When using Zone 2 connection.
    • Off: When none of the connections above are used.

    Height2 Speaker Assign (for STR-AZ5000ES)/Height3 Speaker Assign (for STR-AZ7000ES)

    • Zone2: When using Zone 2 connection.
    • Center 2: When using center 2 speaker connection.
    • Off: When none of the connections above are used.

Note

  • You can only set the assignment for the SPEAKER HEIGHT 1 (ZONE 2)/SPEAKER HEIGHT 2 (ZONE 2/CENTER 2 (R ONLY))/SPEAKER HEIGHT 3 (FRONT WIDE/ZONE 2/CENTER 2 (R ONLY)) terminals if the speaker pattern is set to 2.0, 2.1, 3.0, 3.1, 4.0, 4.1, 5.0, 5.1, 5.0 (SB), 5.1 (SB), 6.0, 6.1, 6.0 (SB), 6.1 (SB), 7.0 or 7.1.
Go to Page Top