Multi Channel AV ReceiverSTR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES

Available input sources for main zone

You can select all input sources from every device connected to the receiver in the main zone.

^*1 The video signals input from the VIDEO IN SAT/CATV jack will be output from the VIDEO OUT MONITOR jack.

^*2 The video signals input from the VIDEO IN AUX jack will be output from the VIDEO OUT MONITOR jack.

Input sources which can be output to Zone 2 (analog connection)

The following input sources can be output to Zone 2.

^*1 The following restrictions are set on the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver:

• Only 2ch PCM signals are output to Zone 2.
• Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.
• Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if the same source signals as the main zone are selected in Zone 2.

If the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio output to 2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.

^*2 The video signals input from the VIDEO IN SAT/CATV jack will be output from the VIDEO OUT ZONE 2 jack.

^*3 The video signals input from the VIDEO IN AUX jack will be output from the VIDEO OUT ZONE 2 jack.

^*4 To select this input, set the [TV] input to one of the following settings in the [Assignment] screen under [Input Settings].

• Set [HDMI] to a setting other than [OUT A(eARC/ARC)] ([None]).
• Set [Input Mode] to [Optical], [Coaxial] or [Analog].

Input sources which can be output to Zone 2 (HDMI connection)

The following input sources can be output to Zone 2 when Zone 2 speakers are connected to another receiver or amplifier connected to the HDMI OUT B (ZONE 2) jack.

^*1 The following restrictions are set on the digital audio signals input from the coaxial and optical input jacks on the receiver:

• Only 2ch PCM signals are output to Zone 2.
• Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.
• Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if the same source signals as the main zone are selected in Zone 2.

If the digital audio signals input from the coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio output to 2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.

^*2 When [HDMI OUT B Mode] in [HDMI Settings] is set to [Zone2], the video signals that can be played are limited as follows:

• HDMI IN 1, 2, 3 and 4 jacks: 4K/60p 4:4:4
• HDMI IN 5, 6 jacks and HDMI IN 7 jack (STR-AZ7000ES/STR-AZ5000ES only): 4K/60p 4:2:0

^*3 To select this input, set the [TV] input to one of the following settings in the [Assignment] screen under [Input Settings].

• Set [HDMI] to a setting other than [OUT A(eARC/ARC)] ([None]).
• Set [Input Mode] to [Optical], [Coaxial] or [Analog].

Input sources which can be output to Zone 3

The following input sources can be output to Zone 3.

You cannot watch video in Zone 3.