Listening with BLUETOOTH headphones/speakers (Pairing operation)

You can listen to audio sources playing via this receiver by using BLUETOOTH headphones/speakers.

  1. Select [Setup] - [Bluetooth Settings] from the home menu.
  2. Set [Bluetooth Mode] to [Transmitter].
  3. Turn on the BLUETOOTH headphones/speakers and set them to pairing mode.
  4. Select the name of the headphones or speakers from the [Device List] in the [Bluetooth Settings] menu.

    If you cannot find your device name in the list, select [Scan].

    After [CONNECTING] flashes and the name of the headphone or speaker is displayed on the display panel, pairing is complete.

    * “XXXXXX” represents the name of a detected BLUETOOTH device.

  5. Press one of the input buttons to select the input you want.
    The sound is output from the BLUETOOTH headphones/speakers. No sound is output from the receiver.
  6. Adjust the volume of the BLUETOOTH headphones/speakers.

    Volume control on the receiver and remote control only works for the BLUETOOTH headphones/speakers.

Note

  • The BLUETOOTH device will be reconnected when [Bluetooth Mode] is changed from [Receiver] to [Transmitter]. Press BLUETOOTH TX/RX on the remote control to reconnect quickly.
  • You can also press BLUETOOTH TX/RX on the remote control to switch [Bluetooth Mode]. However, you cannot switch [Bluetooth Mode] when [NOT. USE] appears on the display panel. Check if you are already using the BLUETOOTH function.
  • You may not be able to adjust the volume level depending on the BLUETOOTH receiver.
  • When [Bluetooth Audio] is selected as an input, you cannot set [Bluetooth Mode] to [Transmitter].
  • You can register up to 10 sets of BLUETOOTH receiver. If a 11th set of BLUETOOTH receiver is registered, the least recently connected BLUETOOTH receiver will be replaced by the new ones.
  • This receiver can display up to 15 detected BLUETOOTH receiver in the [Device List].
  • You cannot change the settings of [Sound Field] and [360 Spatial Sound Mapping] in the options menu while transmitting sound.
  • Some content cannot be output due to copyright protection.
  • The audio output from the BLUETOOTH receiver may be delayed compared to that from this receiver because of the characteristics of BLUETOOTH wireless technology.
  • Audio cannot be output to BLUETOOTH devices that do not support SCMS-T.
  • No sound is output from the speakers or HDMI OUT jacks when BLUETOOTH receiver is successfully connected to this receiver.
  • The [Bluetooth Audio] function is disabled when [Bluetooth Mode] is set to [Transmitter].
  • If you connect a BLUETOOTH device during streaming playback, playback will stop. If you connect a BLUETOOTH device while playing music from a USB device, playback will pause.

Hint

  • If the BLUETOOTH device in step 3 is the most recently connected device, you can connect it to this receiver automatically by simply pressing BLUETOOTH RX/TX on the remote control. In this case, you do not need to perform step 4.