Adjusting the crossover frequency settings for IMAX Enhanced content playback (IMAX Adjustment)
When you watch IMAX Enhanced content, the following settings are deactivated so as not to interfere with the sound of the content.
- HPF/Crossover
- LPF for Subwoofer
However, IMAX Enhanced content may not be reproduced adequately depending on the size and specifications of your speakers.
If adjustment is necessary when watching IMAX Enhanced content, perform the following operations.
The function only works when a DTS stream is input.
- Adjusting the crossover frequency for front, center, surround, and/or height speaker output
- Adjusting the crossover frequency for the subwoofer output
- Select [Setup] - [Audio Settings] from the home menu.
- Select [IMAX Adjustment].
- Select the setting you want.
- HPF/Crossover: Sets the crossover frequency of speakers other than the subwoofer. (Default setting: Auto, 40 Hz to 200 Hz)
- LPF for Subwoofer: Sets the crossover frequency of the subwoofer. (Default setting: Auto, 40 Hz to 200 Hz)
- Subwoofer Volume: Sets the volume of the subwoofer playing the IMAX Enhanced contents.
- Redirect to Subwoofer: Redirects the low frequency band of the IMAX signal to the subwoofer. When this setting is set to [On], the bass with the bass management function is output even while playing IMAX content. When this setting is set to [Off], the bass that IMAX content has is output.
Note
- The setting value for surround speakers is applied to surround back speakers.
