Indicators on the display panel

Illustration showing the position of each indicator on the display panel

  1. Playback channel indicator

    Indicates the speaker that is designated to output sound. Shows how the receiver down-mixes or up-mixes the source sound, based on the speaker settings.

    FWL (for STR-AZ7000ES only)

    Front Wide Left

    FWR (for STR-AZ7000ES only)

    Front Wide Right

    S-Center

    S-Center

    L

    Front Left

    R

    Front Right

    C

    Center

    SL

    Surround Left

    SR

    Surround Right

    SBL

    Surround Back Left

    SBR

    Surround Back Right

    H1L

    Height1 Left

    H1R

    Height1 Right

    H2L (for STR-AZ7000ES/STR-AZ5000ES only)

    Height2 Left

    H2R (for STR-AZ7000ES/STR-AZ5000ES only)

    Height2 Right

    H3L (for STR-AZ7000ES only)

    Height3 Left

    H3R (for STR-AZ7000ES only)

    Height3 Right

  2. Speaker system indicator

  3. C2 (for STR-AZ7000ES/STR-AZ5000ES only)

    Lights up when center 2 speaker is connected.

  4. BI-AMP

    Lights up when [Surround Back Speaker Assign] in the [Speaker Settings] menu is set to [BI-AMP] to use a bi-amplifier connection.

  5. (up)/(down)/(left)/(right)

    Indicates currently available operation on the display panel using (up)/(down)/(left)/(right) on the remote control.

  6. SW

    Lights up when subwoofer(s) is (are) connected and the audio signal is output from the PRE OUT SUBWOOFER jack(s).

  7. IN-CEILING

    Lights up when the In-Ceiling Speaker Mode is activated.

  8. ST

    Lights up when the receiver tunes to an FM stereo broadcast.

  9. NETWORK

    Lights up when the receiver is connected to a wireless LAN or wired LAN network.

  10. UPDATE

    Lights up when a software update is available for download.

  11. ZONE 2, ZONE 3

    The applicable indicator lights up when [Power] for [Zone2] or [Zone3] in the [Zone Controls] menu is set to [On].

  12. VOLUME

    Displays the current volume.

  13. DSD Native

    Lights up when the receiver performs DSD Native playback.

  14. HDMI OUT A+B

    Displays the output you have selected using HDMI OUT on the front panel or HDMI OUTPUT on the remote control. Turns off when [HDMI OUT OFF] is selected.

  15. BLUETOOTH indicator

    BT lights up when a BLUETOOTH device is connected. It blinks during BLUETOOTH connection operation.

    BT TX lights up when [Bluetooth Mode] is set to [Transmitter].

  16. D.C.A.C.

    Lights up when the measurement results of the Auto Calibration function are applied.

  17. A.P.M.

    Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the D.C.A.C. IX (Digital Cinema Auto Calibration) function.

  18. D.R.C

    Lights up when dynamic range compression is activated.

  19. EQ

    Lights up when the equalizer is activated.

  20. Neural:X

    Lights up when DTS Neural:X decoding is activated.

  21. DTS:X

    Lights up when DTS:X decoding is activated.

  22. IMAX

    Lights up when the IMAX effect is activated.

  23. Dsur

    Lights up when Dolby Surround decoding is activated.

  24. Dolby Atmos

    Lights up when Dolby Atmos decoding is activated.

  25. 360SSM

    Lights up when the 360 Spatial Sound Mapping function is activated.

  26. Input indicator

    Lights up to indicate the current input.

    HDMI

    The receiver recognizes devices connected via an HDMI IN jack.

    COAX

    Digital signals are input through the COAXIAL jack.

    OPT

    Digital signals are input through the OPTICAL jack.

    eARC

    TV input is selected, and eARC or ARC signals are detected.

Go to Page Top