HDMI Output Connector Output Formats
The resolution of the output format is limited by [Frequency/Scan]/[Video Format] on the [Project] status screen or the [Project] – [Rec Format] – [Frequency]/[Video Format] settings in the full menu. The video will not be output if a higher resolution than the playback video resolution is configured.
The following table shows the output formats supported by the HDMI output connector of the HXR-NX800.
| [Project] – [Rec Format] | [Monitoring] – [Output Format] | |
|---|---|---|
| [Frequency] | [Video Format] | [HDMI] |
| 100/119.88Hz | 3840×2160 | 3840×2160P |
| 1920×1080P (default value) | ||
| 1920×1080i | ||
| 1920×1080 | 1920×1080P (default value) | |
| 1920×1080i | ||
| 50/59.94Hz | 3840×2160 | 3840×2160P |
| 1920×1080P (default value) | ||
| 1920×1080i | ||
| 1920×1080 | 1920×1080P (default value) | |
| 1920×1080i | ||
| 720×480P1) 3) | ||
| 720×576P2) 3) | ||
| 25/29.97Hz | 3840×2160 | 3840×2160P |
| 1920×1080P | ||
| 1920×1080i (default value) | ||
| 1920×1080 | 1920×1080P | |
| 1920×1080i (default value) | ||
| 23.98Hz | 3840×2160 | 3840×2160P |
| 1920×1080P (default value) | ||
| 1920×1080 | 1920×1080P (default value) | |
1)When the system frequency is 59.94.
2)When the system frequency is 50.
3)The screen display cannot be embedded.
TP1001670418