Using a Bluetooth Remote Control
You can control the unit remotely using a Bluetooth remote control (option). Visit the support portal for details about Bluetooth remote controls supported by the unit.
https://www.sony.com/electronics/support/articles/00266597?utm_source=glean
Check steps 1 and 2.
Pairing the unit and Bluetooth remote control
- Set [Network] – [Bluetooth] – [Setting] to [On] in the full menu.
-
Select [Network] – [Pairing] – [Execute] in the full menu.
The pairing standby screen appears.
-
Initiate pairing on the Bluetooth remote control.
For details about operation, refer to the operating instructions for the Bluetooth remote control.
When paired successfully, a pairing confirmation screen appears on the unit.
-
Select [OK].
Control of the unit using the Bluetooth remote control is enabled. After connecting for the first time, subsequently you can connect the unit and Bluetooth remote control just by setting [Bluetooth] – [Setting] to [On].
Hint
- The Bluetooth remote control is connected via Bluetooth only while controlling the unit from the Bluetooth remote control.
-
If the unit does not respond correctly, check the following and pair the devices again.
- Check that the unit is not connected via Bluetooth to another device.
- Execute [Network] – [Network Reset] – [Reset] in the full menu.
Note
- When the unit is initialized, the pairing information is cleared. To use the Bluetooth remote control, pair the devices again.
- If Bluetooth communication is unstable, make sure there are no obstacles, such as other persons or metallic objects, between the unit and the Bluetooth remote control.
- If large volume communication is in progress, such as when streaming using the wireless LAN 2.4 GHz band, the response to the Bluetooth remote control may become unstable. In this case, consider using a wired LAN connection.
Checking the paired Bluetooth remote control
Select [Network] – [Bluetooth] – [Manage Paired Device] in the full menu to display the paired Bluetooth remote control.
Deleting a paired Bluetooth remote control
- Select [Network] – [Bluetooth] – [Manage Paired Device] in the full menu.
- Select the Bluetooth remote control to delete.
- Select [Execute].