Rear Side/Connector Block/Card Slots

Illustration of rear side, connector block, and card slots of camera

  1. LCD monitor/Touch panel
  2. Viewfinder

  3. Eye sensor

    Detects whether your eyes are close to the viewfinder or not, and controls the screen display on the LCD monitor/viewfinder.

  4. BATT RELEASE (battery release) button

    Press the button to remove the battery.

  5. DC IN (DC power input) connector

    Standard DC jack.

  6. Battery compartment

  7. USB-C® connector

    USB Type-C cable connector. The screw hole on the right side of the USB-C connector is for a screw lock Type-C cable.

  8. HDMI output connector

    Outputs an HDMI signal.

  9. SDI OUT connector (BNC type)

    Outputs an SDI signal. Available on the PXW-Z200 only.

  10. TC IN/OUT connector (BNC type)

    Timecode input/output connector. Available on the PXW-Z200 only.

    Used for the following applications, depending on the TC IN/OUT switch setting.

    IN: Reference timecode signal input when locking the timecode of the unit to an external device.

    OUT: Timecode signal output from the unit when locking the timecode of an external device to the timecode of the unit.

  11. LAN connector

    Wired LAN connector.

  12. Record START/STOP button / HOLD switch (grip)

    Press the record START/STOP button, turning the light on, to start recording. Press again, turning the light off, to stop recording.

    When the HOLD switch is in the HOLD position, the record START/STOP button cannot be pressed.

  13. Multi selector

    Used for auto focus operation and menu operation. Moves the cursor in 8 directions and selects values when pressed.

  14. Access indicator A
  15. CFexpress Type A/SD card slot (A)
  16. CFexpress Type A/SD card slot (B)
  17. Access indicator B
TP1001670290