Connecting an External Device to the SDI Output (PXW-Z200 only)

Enable/disable the output and set the output format on the [Monitoring] status screen.

Use a commercially available 75 Ω coaxial cable for connection.

To start recording on the unit and external device simultaneously

When using SDI signal output, set [Project] – [SDI/HDMI Rec Control] – [Setting] to [SDI/HDMI Remote I/F]/[Parallel Rec] in the full menu to output a REC trigger signal to the external device connected to the SDI OUT connector to start recording in sync with the unit.

Note

  • If a connected external device does not support a REC trigger signal, the device cannot be operated.
  • When set to [SDI/HDMI Remote I/F], only the REC trigger signal is output if there is no memory card inserted.
TP1001670411