[Shooting] Menu

The following tables describe the function and settings of each menu item.

[Shooting] – [ISO/Gain]

Sets gain settings.

Menu item Sub-item setting Factory default value Description
[Mode] [ISO] / [dB] [dB]

Selects the gain setting mode.

Note

  • In log shooting mode, this is set to [ISO] (fixed).
[ISO/Gain<H>] For details about settings, see the following topic.
[ISO/Gain] Settings and Default Values 		– Sets the <H> gain preset value.
[ISO/Gain<M>] For details about settings, see the following topic.
[ISO/Gain] Settings and Default Values 		– Sets the <M> gain preset value.
[ISO/Gain<L>] For details about settings, see the following topic.
[ISO/Gain] Settings and Default Values 		– Sets the <L> gain preset value.
[Shockless Gain] [On] / [Off] [Off] Turns the shockless gain on/off.

[Shooting] – [ND Filter]

Sets the preset values for the ND filter.

Menu item Sub-item setting Factory default value Description
[Preset1] 1/4 / 1/8 / 1/16 / 1/32 / 1/64 / 1/128 1/4 Sets the preset 1 value for the ND filter.
[Preset2] 1/4 / 1/8 / 1/16 / 1/32 / 1/64 / 1/128 1/16 Sets the preset 2 value for the ND filter.
[Preset3] 1/4 / 1/8 / 1/16 / 1/32 / 1/64 / 1/128 1/64 Sets the preset 3 value for the ND filter.

[Shooting] – [Shutter]

Sets electronic shutter operation.

Menu item Sub-item setting Factory default value Description
[Mode] [Speed] / [Angle] [Speed] Selects the operating mode of the electronic shutter.
Used for shooting fast-moving subjects clearly. Select [Speed] mode for setting the shutter speed as a time in seconds or [Angle] mode for setting the shutter speed as a shutter angle.
[Shutter Speed On/Off] [On] / [Off] [Off] Sets whether the exposure time when [Speed] mode is selected follows the [Shutter Speed] setting or is set for full exposure.
[Shutter Speed] 64F to 1/8000
The available settings vary depending on the system frequency of the selected recording format.
119.88P:
1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000
100P:
1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000
59.94P:
64F / 32F / 16F / 8F / 7F / 6F / 5F / 4F / 3F / 2F / 1/60 / 1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000
50P:
64F / 32F / 16F / 8F / 7F / 6F / 5F / 4F / 3F / 2F / 1/50 / 1/60 / 1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000
29.97P:
64F / 32F / 16F / 8F / 7F / 6F / 5F / 4F / 3F / 2F / 1/30 / 1/40 / 1/50 / 1/60 / 1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000
25P:
64F / 32F / 16F / 8F / 7F / 6F / 5F / 4F / 3F / 2F / 1/25 / 1/33 / 1/50 / 1/60 / 1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000
23.98P:
64F / 32F / 16F / 8F / 7F / 6F / 5F / 4F / 3F / 2F / 1/24 / 1/32 / 1/48 / 1/50 / 1/60 / 1/96 / 1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 1/1000 / 1/2000 / 1/4000 / 1/8000		 119.88P: 1/120
100P: 1/100
59.94P: 1/60
50P: 1/50
29.97P: 1/30
25P: 1/25
23.98P: 1/24

Sets the shutter speed when [Speed] mode is selected.

Note

  • When the system frequency is 100P or 119.88P, 2F to 64F cannot be selected.
[Shutter Angle] 64F / 32F / 16F / 8F / 7F / 6F / 5F / 4F / 3F / 2F / 360.0° / 300.0° / 270.0° / 240.0° / 216.0° / 210.0° / 180.0° / 172.8° / 150.0° / 144.0° / 120.0° / 90.0° / 86.4° / 72.0° / 45.0° / 30.0° / 22.5° / 11.25° / 5.6° 180.0°

Sets the shutter angle when [Angle] mode is selected.

Note

  • When the system frequency is 100P or 119.88P, 2F to 64F cannot be selected.
[ECS On/Off] [On] / [Off] [Off] Turns ECS mode on/off.
[ECS Frequency] 23.99 to 8000
The available settings vary depending on the system frequency of the selected recording format.		 119.88P: 120.0
100P: 100.0
59.94P: 60.00
50P: 50.00
29.97P: 30.00
23.98P: 23.99
25P: 25.02		 Sets the ECS frequency when ECS mode is selected.

[Shooting] – [Auto Exposure]

Sets automatic exposure adjustment settings.

Menu item Sub-item setting Factory default value Description
[Level] +3.0 / +2.75 / +2.5 / +2.25 / +2.0 / +1.75 / +1.5 / +1.25 / +1.0 / +0.75 / +0.5 / +0.25 / ±0 / −0.25 / −0.5 / −0.75 / −1.0 / −1.25 / −1.5 / −1.75 / −2.0 / −2.25 / −2.5 / −2.75 / −3.0 ±0 Sets the brightness level for the automatically detected exposure.
[Mode] [Backlight] / [Standard] / [Spotlight] [Standard] Sets the operating mode of auto exposure adjustment.
[Backlight]: Mode for reduced darkening of shadows when the subject is backlit
[Standard]: Standard mode
[Spotlight]: Mode for reduced clipped whites when subject is lit by spotlighting
[Speed] −99 to +99 ±0 Sets the adjustment speed of auto exposure adjustment.
[AGC] [On] / [Off] [Off] Turns auto gain control on/off.
[AGC Limit] For details about settings, see the following topic.
[AGC Limit] Settings and Default Values 		– Sets the maximum gain of the auto gain control.
[AGC Point] F2.8 / F4 / F5.6 F2.8 Sets the F-stop value of the iris where auto gain control operation starts when [AGC] is set to [On].
[Auto Shutter] [On] / [Off] [Off] Turns auto shutter on/off.
[A.SHT Limit] 1/100 / 1/150 / 1/200 / 1/250 / 1/2000 1/2000 Sets the fastest shutter speed of the auto shutter.
[A.SHT Point] F5.6 / F8 / F11 F8 Sets the F-stop value of the iris where auto shutter operation starts when [Auto Shutter] is set to [On].
[Clip High light] [On] / [Off] [Off] Turns the function that ignores brightest areas to provide a flatter response at high luminance on/off.
[Detect Window] 1 / 2 / 3 / 4 / 5 / 6 / [Custom] 1 Sets the light metering range for automatically adjusting the exposure according to the brightness of the subject. (Not available when adjusting exposure manually)
[Detect Window Indication] [On] / [Off] [Off] Turns the light metering range indication on/off.
[Custom Width] 40 to 999 500 Sets the width of the light metering range.
[Custom Height] 70 to 999 500 Sets the height of the light metering range.
[Custom H Position] −479 to +479 ±0 Sets the horizontal position of the light metering range.
[Custom V Position] −464 to +464 ±0 Sets the vertical position of the light metering range.

[Shooting] – [White]

Sets white balance settings.

Menu item Sub-item setting Factory default value Description
[Preset White] 2000K to 15000K 3200K Sets the white balance preset value.
[Color Temp <A>] 2000K to 15000K 3200K

Sets the white balance color temperature saved in memory A.

Note

  • Since [Color Temp] is clipped at 2000K and 15000K during [R Gain]/[B Gain] adjustment, it may not be possible to display the correct [Color Temp] value for the R/B gain value.
[Tint<A>] −99 to +99 ±0

Sets the white balance [Tint] value saved in memory A.

Note

  • Since [Tint] is clipped at ±99 during [R Gain]/[B Gain] adjustment, it may not be possible to display the correct [Tint] value for the R/B gain value.
[R Gain <A>] −99.0 to +99.0 ±0.0 Sets the white balance R gain value saved in memory A.
[B Gain <A>] −99.0 to +99.0 ±0.0 Sets the white balance B gain value saved in memory A.
[Color Temp <B>] 2000K to 15000K 3200K

Sets the white balance color temperature saved in memory B.

Note

  • Since [Color Temp] is clipped at 2000K and 15000K during [R Gain]/[B Gain] adjustment, it may not be possible to display the correct [Color Temp] value for the R/B gain value.
[Tint<B>] −99 to +99 ±0

Sets the white balance [Tint] value saved in memory B.

Note

  • Since [Tint] is clipped at ±99 during [R Gain]/[B Gain] adjustment, it may not be possible to display the correct [Tint] value for the R/B gain value.
[R Gain <B>] −99.0 to +99.0 ±0.0 Sets the white balance R gain value saved in memory B.
[B Gain <B>] −99.0 to +99.0 ±0.0 Sets the white balance B gain value saved in memory B.

[Shooting] – [White Setting]

Adjusts white balance settings.

Menu item Sub-item setting Factory default value Description
[Shockless White] [Off] / 1 / 2 / 3 2 Sets the white balance response speed when switching white balance mode.
[Off]: Switches instantaneously.
1 to 3: Switches more slowly the higher the number.
[ATW Speed] 1 / 2 / 3 / 4 / 5 3 Sets the response speed in auto white mode.
1: Fastest response speed
[White Switch<B>] [Memory] / [ATW] [Memory] Selects the white balance adjustment mode that is selected when the WHT BAL switch is set to B.
[Filter White Memory] [On] / [Off] [Off]

Turns the function that sets the white balance memory area for each ND filter on/off.
[On]: Sets the white balance memory for each ND filter.

Hint

  • In preset mode, there are four settings ([Clear]/1/2/3). In variable mode, there are two settings ([Clear] and [On]).

[Off]: Sets white balance memory common to all ND filters.

[Shooting] – [Offset White]

Sets white balance offset settings.

Menu item Sub-item setting Factory default value Description
[Offset White <A>] [On] / [Off] [Off]

Selects whether to add ([On]) or not ([Off]) an offset value to the white balance in memory A.

Note

  • This is set to [Off] (fixed) in log shooting mode.
[Offset Color Temp<A>] −99 to +99 ±0 Sets the color temperature offset to be added to the white balance in memory A when [Offset White <A>] is set to [On].
[Offset Tint<A>] −99 to +99 ±0 Sets the [Tint] offset to be added to the white balance in memory A when [Offset White <A>] is set to [On].
[Offset White <B>] [On] / [Off] [Off]

Selects whether to add ([On]) or not ([Off]) an offset value to the white balance in memory B.

Note

  • This is set to [Off] (fixed) in log shooting mode.
[Offset Color Temp<B>] −99 to +99 ±0 Sets the color temperature offset to be added to the white balance in memory B when [Offset White <B>] is set to [On].
[Offset Tint<B>] −99 to +99 ±0 Sets the [Tint] offset to be added to the white balance in memory B when [Offset White <B>] is set to [On].
[Offset White<ATW>] [On] / [Off] [Off]

Selects whether to add ([On]) or not ([Off]) an offset value to the white balance in auto white mode.

Note

  • This is set to [Off] (fixed) in log shooting mode.
[Offset Color Temp<ATW>] −99 to +99 ±0 Sets the color temperature offset to be added to the white balance in auto white mode when [Offset White<ATW>] is set to [On].
[Offset Tint<ATW>] −99 to +99 ±0 Sets the [Tint] offset to be added to the white balance in auto white mode when [Offset White<ATW>] is set to [On].

[Shooting] – [Focus]

Sets focus settings.

Menu item Sub-item setting Factory default value Description
[AF Transition Speed] [1(Slow)] / 2 / 3 / 4 / 5 / 6 / [7(Fast)] 5 Sets the speed of the focus drive for when the subject changes during auto focus.
[AF Subj. Shift Sens.] [1(Locked On)] / 2 / 3 / 4 / [5(Responsive)] [5(Responsive)] Sets the sensitivity for changing subject focus during auto focus.
[Focus Area] [Wide] / [Zone] / [Flexible Spot] [Wide] Sets the target area for auto focus and push auto focus.
[Wide]: Searches for a subject over a wide angle of the image when focusing.
[Zone]: Automatically searches for a focus point within the specified zone.
[Flexible Spot]: Focuses on a specified position in the image.
[Subject Recognition AF] [Human Only AF] / [Human Priority AF] / [Off] [Human Priority AF] Sets the mode of the subject recognition AF function.
[Human Only AF]: The camera detects subjects (people) and focuses on and tracks their faces, eyes, heads, or bodies. Auto focus operation is paused while a person is not detected.
[Human Priority AF]: The camera detects subjects (people) and focuses on and tracks their faces, eyes, heads, or bodies. Auto focus operation is active even when a person is not detected.
[Off]: The subject recognition AF function is disabled.
[Touch Function in MF] [Tracking AF] / [Spot Focus] [Tracking AF] Sets the touch operation mode during manual focus.
[Multi Selector Function] [Subject Sel. Cursor] / [Pointer] [Subject Sel. Cursor] Sets the method for specifying the auto focus target in response to multi selector operation.
[Subject Sel. Cursor]: Selects a subject recognition frame using the multi selector.
[Pointer]: Selects a subject on the screen by moving the tracking AF pointer using the multi selector.
[Pointer Color] [Orange] / [White] / [Yellow] / [Cyan] / [Green] / [Magenta] / [Red] / [Blue] [Orange] Sets the color of the pointer used for specifying the focus target.
[Pointer Border] [On] / [Off] [On] Turns the border of the pointer used for specifying the focus target on/off.
[AF Assist] [On] / [Off] [On] When set to [On], this allows you to temporarily override auto focus and set focus manually.

[Shooting] – [S&Q Motion]

Sets Slow & Quick Motion mode settings.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns Slow & Quick Motion mode on/off.
[Frame Rate] 1fps to 60fps / 100fps / 120fps / 150fps / 180fps / 200fps / 240fps –

Sets the frame rate for Slow & Quick Motion mode.

Note

  • The available settings vary depending on the selected system frequency, codec, and video format.

[Shooting] – [LUT On/Off]

Sets LUT settings.

Menu item Sub-item setting Factory default value Description

[ SDI/HDMI]

(PXW-Z200 only)

 [LUT On] / [LUT Off] [LUT Off]

Selects whether to apply a monitor LUT to the SDI and HDMI output video.

Note

  • Configurable in log shooting mode.

[ HDMI]

(HXR-NX800 only)

 [LUT On] / [LUT Off] [LUT Off]

Selects whether to apply a monitor LUT to the HDMI output video.

Note

  • Configurable in log shooting mode.
[ LCD/VF/Proxy/Stream] [LUT On] / [LUT Off] [LUT Off]

Selects whether to apply a monitor LUT to the LCD, viewfinder, proxy, and stream output video.

Note

  • Configurable in log shooting mode.

[Shooting] – [NIGHTSHOT]

Sets night shot settings.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns night shot mode on/off.
[IR Light] [On] / [Off] [On] Turns the infrared light on/off when night shot mode is turned on.
[Image Color] [White] / [Green] [White] Sets the color of the image when night shot mode is turned on.

[Shooting] – [Noise Suppression]

Sets noise suppression settings.

Hint

  • The [Setting(Custom)] and [Level(Custom)] settings are reflected in the [Target Display] setting.
Menu item Sub-item setting Factory default value Description
[Setting(Custom)] [On] / [Off] [On]

Turns the noise suppression function on/off in custom shooting mode.

Note

  • This function cannot be configured in log shooting mode.
[Level(Custom)] [Low] / [Mid] / [High] [Mid]

Sets the noise suppression level in custom shooting mode.

Note

  • This function cannot be configured in log shooting mode.
[Setting(Flexible ISO)] [On] / [Off] [Off]

Turns the noise suppression function on/off in log shooting mode.

Note

  • This function cannot be configured in custom shooting mode.
[Level(Flexible ISO)] [Low] / [Mid] / [High] [Mid]

Sets the noise suppression level in log shooting mode.

Note

  • This function cannot be configured in custom shooting mode.

[Shooting] – [Flicker Reduce]

Sets flicker correction settings.

Menu item Sub-item setting Factory default value Description
[Mode] [Auto] / [On] / [Off] [Off] Sets the flicker correction mode.
[Frequency] [50Hz] / [60Hz] [60Hz] Sets the frequency of the power source supplying the lighting that is causing the flicker.

[Shooting] – [SteadyShot]

Sets image stabilization settings.

Menu item Sub-item setting Factory default value Description
[Setting] [Active] / [Standard] / [Off] [Standard] Sets the image stabilization function.
TP1001670395