Left Side/Front Side

Illustration of left side and front side of camera

  1. Diopter adjustment dial

    Turn the knob to adjust the viewfinder image so that is clearest.

  2. Air outlet

    Note

    • Do not cover the air outlet.
    • Exercise caution as the area near the air outlet will be hot.

  3. Accessory attachment screw holes

    M3 size screw hole. Use a screw of length 8 mm or shorter.

  4. TC IN/OUT switch

    Switches the TC IN/OUT connector between input and output. Available on the PXW-Z200 only.

  5. REMOTE connector

    Connect to general-purpose LANC jack accessory.

  6. Grip belt
  7. Microphone holder

  8. INPUT 1/INPUT 2 (audio input) connectors

    Audio input connectors. Set the INPUT 1/INPUT 2 switches for the devices connected to the INPUT 1/ INPUT 2 connectors, respectively.

  9. INPUT 3 connector

    Connect to a 3.5 mm stereo mini jack (3-pole) microphone.

  10. Recording/tally lamp (front)

    Lights up when recording starts. Flashes when the remaining capacity on the recording media or battery is low.

  11. Night shot infrared light

  12. INPUT 1/INPUT 2 (LINE/MIC/MIC+48V) switches

    Switches the audio devices connected to the INPUT 1/INPUT 2 connectors.

    LINE: External audio device (e.g. mixer)

    MIC: Dynamic microphone, battery-operated microphone

    MIC+48V: +48 V phantom power microphone

  13. Handle internal microphone
  14. Lens hood
  15. Lens hood shutter
TP1001670288