[Network] Menu

The following tables describe the function and settings of each menu item.

[Network] – [Network Setup]

Executes the network setup assist tool.

Menu item Sub-item setting Factory default value Description
[Setup for Mobile App] – – Starts the network setup assist tool.
[LAN Type Select] [Wireless LAN AP 2.4G] / [Wireless LAN AP 5G] / [Wireless LAN ST] / [Wired LAN] / [Off] [Off] Sets the LAN connection method.
For models that do not support the 5 GHz band, [Wireless LAN AP 2.4G] and [Wireless LAN AP 5G] are replaced by [Wireless LAN AP].
[Show Authentication] – – Displays the user name and password for access authentication as text and QR code.
[Edit Authentication] [User Name] – Sets the user name for access authentication.
[Input Password] –

Sets the password for access authentication.

Note

  • From a security standpoint, it is recommended that you set a password with a sufficiently long character string that is hard to guess by others, and that you store it safely.
[Generate Password] – [Execute] / [Cancel] – Automatically generates a password for access authentication.
[Execute]: Execute function.

[Network] – [Wireless LAN]

Sets settings related to wireless LAN.

Menu item Sub-item setting Factory default value Description
[Setting] [Access Point (2.4GHz)] / [Access Point (5GHz)] / [Station Mode] / [Off] [Off]

Selects the operation mode of the wireless LAN connection.

For models that do not support the 5 GHz band, [Access Point (2.4GHz)] and [Access Point (5GHz)] are replaced by [Access Point Mode].

Note

  • The unit does not support simultaneous use of wireless LAN and wired LAN.
[Channel] – – Displays the wireless LAN channel.
(Access point mode only)
[Camera SSID & Password] – – Displays the SSID and password of the unit.
(Access point mode only)
[Regenerate Password] – – Regenerates the password for access point mode.
(Access point mode only)
[Camera Remote Control] – – Displays whether remote control from a mobile device connected to the unit by wireless LAN in station mode is enabled.
(Station mode only)
[Connected Network] – – Displays the connected wireless LAN network access point.
(Station mode only)
[Scan Networks] – – Detects the wireless LAN networks access points and displays a list.
(Station mode only)
[WPS] [Execute] / [Cancel] – Establishes a connection using WPS (Wi-Fi Protected Setup).
[Execute]: Execute function.
(Station mode only)
[Manual Register] – – Sets the wireless LAN network access point to connect.
(Station mode only)
[SSID] – Sets the SSID for the access point to connect.
[Security] – Set the type of security for the access point to connect.
[Password] –

Sets the password for the access point to connect.

Hint

  • When security is set to [WPA/WPA2]: *******. When security is set to [None]: (blank)
[DHCP] – Turns DHCP on/off.
[IP Address] – Sets the IP address of the unit when [DHCP] is set to [Off].
[Subnet Mask] – Sets the subnet mask of the unit when [DHCP] is set to [Off].
[Gateway] – Sets the default gateway of the unit when [DHCP] is set to [Off].
[DNS Auto] – Enables/disables DNS auto acquisition when [DHCP] is set to [On].
[Primary DNS Server] – Sets the primary DNS server of the unit when [DNS Auto] is set to [Off].
[Secondary DNS Server] – Sets the secondary DNS server of the unit when [DNS Auto] is set to [Off].
[IP Address] – – Displays the IP address of the unit.
[Subnet Mask] – – Displays the subnet mask of the unit.
[MAC Address] – – Displays the MAC address of the wireless LAN interface of the unit.

[Network] – [Wired LAN]

Sets settings related to wired LAN.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off]

Turns wired LAN on/off.

Note

  • The unit does not support simultaneous use of wireless LAN and wired LAN.
[Camera Remote Control] [Enable] / [Disable] [Disable] Sets whether to enable remote control from a device connected to the unit by wired LAN.
[Detail Settings] – – Configures properties of the wired LAN.
[DHCP] – Turns DHCP on/off.
[IP Address] – Sets the IP address of the unit when [DHCP] is set to [Off].
[Subnet Mask] – Sets the subnet mask of the unit when [DHCP] is set to [Off].
[Gateway] – Sets the default gateway of the unit when [DHCP] is set to [Off].
[DNS Auto] – Enables/disables DNS auto acquisition when [DHCP] is set to [On].
[Primary DNS Server] – Sets the primary DNS server of the unit when [DNS Auto] is set to [Off].
[Secondary DNS Server] – Sets the secondary DNS server of the unit when [DNS Auto] is set to [Off].
[IP Address] – – Displays the IP address of the unit.
[Subnet Mask] – – Displays the subnet mask of the unit.
[MAC Address] – – Displays the MAC address of the unit.

[Network] – [USB Tethering]

Sets settings related to USB tethering.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Enables/disables the USB tethering function of the unit.
[Camera Remote Control] [Enable] / [Disable] [Disable] Enables/disables remote control via USB tethering from “Monitor＆Control,” “Creators' App for enterprise,” or other mobile device application.
[IP Address] – – Displays the IP address of the unit.
[Subnet Mask] – – Displays the subnet mask of the unit.

[Network] – [Bluetooth]

Sets settings related to Bluetooth.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns the Bluetooth function on/off.
[Pairing] [Execute] / [Cancel] – Pairs the unit with a Bluetooth device.
[Execute]: Execute function.
[Manage Paired Device] – – Displays/deletes paired Bluetooth device.
[Device Address] – – Displays the Bluetooth address of the unit.

[Network] – [File Transfer]

Sets settings related to file transfers.

Menu item Sub-item setting Factory default value Description
[Auto Upload] [On] / [Off] [Off]

Turns auto transfer of original clips on/off.

Note

  • When [Project] – [Simul Rec] – [Setting] is set to [On], clips recorded on the memory card in card slot B are not automatically uploaded.
[Auto Upload (Proxy)] [On] / [Off] / [Chunk] [Off]

[On]: Enables auto transfer of proxy clips.
[Off]: Disables auto transfer of proxy clips.
[Chunk]: Automatically transfers proxy clips recorded in chunks without waiting for recording to end.

Note

  • When [Project] – [Simul Rec] – [Setting] is set to [On], clips recorded on the memory card in card slot B are not automatically uploaded. Also, [Chunk] is grayed out and cannot be selected.
[Default Upload Server] – – Selects the file transfer destination server. The server selected here becomes the auto transfer destination for original clips and proxy clips, and the transfer destination for clips from the thumbnail screen.
Displays the [Display Name] setting configured in [Server Settings1] to [Server Settings3].
[Clear Completed Jobs] [Execute] / [Cancel] – Clears completed transfer jobs from the job list.
[Execute]: Execute function.
[Clear All Jobs] [Execute] / [Cancel] – Clears all transfer jobs from the job list.
[Execute]: Execute function.
[View Job List] – – Displays the transfer job list.
[Server Settings1] [Display Name] – Sets the display name shown in the transfer destination settings.
[Service] – [FTP] [FTP] Displays the type of server.
[Host Name] – Sets the host name of the transfer destination server.
[Port] (1 to 65535) 21 Sets the port number of the transfer destination server.
[User Name] – Sets the user name for authentication of the transfer destination server connection.
[Password] – Sets the authentication password of the transfer destination server connection.
[Passive Mode] – [On] / [Off (Active Mode)] [Off (Active Mode)] Turns passive mode on/off.
[Destination Directory] – Sets the name of the transfer destination directory.
[Using Secure Protocol] – [On] / [Off] [Off] Sets whether to use secure FTP transfer (FTPES) ([On]) or not ([Off]).
[Root Certificate] – [Load] / [Clear] / [None] [None] Loads a root certificate for secure FTP transfer and clears settings.
[Root Certificate Status] – [Loaded] / [No Certificate] [No Certificate] Displays the root certificate load status for secure FTP transfer.
[Reset] – [Execute] / [Cancel] – Resets the [Server Settings1] settings to the default values.
[Execute]: Execute function.
[Server Settings2] Same as [Server Settings1] – –
[Server Settings3] Same as [Server Settings1] – –

[Network] – [Stream]

Sets settings related to streaming.

Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns streaming on/off.
[Destination Select] – – Selects the streaming connection destination.
Displays the [Display Name] setting configured in [RTMP/RTMPS 1] to [RTMP/RTMPS 3] and [SRT-Caller 1] to [SRT-Caller 3].
[RTMP/RTMPS 1] – – Sets a RTMP/RTMPS streaming connection.
[Display Name] – Sets the display name shown in [Destination Select].
[Codec] [H.264/AVC] Displays the codec of the streaming video.
[Resolution] – [3840×2160P] / [1920×1080P] / [1280×720P] [1920×1080P] Sets the resolution of the streaming video.
[Bit Rate] [9Mbps] Sets the bit rate of the streaming video.
[Destination URL] – Sets the URL of the server to connect.
[Stream Key] – Sets the stream key used for streaming.
[RTMPS Certificate] – [Load] / [Clear] / [None] [None] Loads/clears a default certificate.
[RTMPS Certificate Status] – [Loaded] / [Default] [Default] Displays the certificate load status for RTMPS connection.
[Reset] – [Execute] / [Cancel] – Returns the settings to the default values.
[Execute]: Execute function.
[RTMP/RTMPS 2] Same as [RTMP/RTMPS 1] – –
[RTMP/RTMPS 3] Same as [RTMP/RTMPS 1] – –
[RTMPS Default Certificates] [Replace] – [Execute] / [Cancel] – Loads default certificates from a memory card inserted in card slot B.
[Execute]: Execute function.
[Reset] – [Execute] / [Cancel] – Initializes the settings of the default certificate group.
[Execute]: Execute function.
[Status] [Preinstall] Displays the status of the default certificate group.
[SRT-Caller 1] – – Sets an SRT streaming connection.
[Display Name] – Sets the display name shown in [Destination Select].
[Codec] [H.264/AVC] Displays the codec of the streaming video.
[Resolution] – [1920×1080P] / [1280×720P] [1920×1080P] Sets the resolution of the streaming video.
[Bit Rate] [9Mbps] Sets the bit rate for streaming.
[Destination URL] – Sets the URL of the server to connect.
[Port] (1 to 65535) 7001 Sets the port of the streaming transmit destination.
[Latency] (20ms to 8000ms) [120 ms] Sets the streaming distribution latency.
[TTL] (1 to 255) [64 times] Sets the time-to-live (TTL) value for streaming.
[Encryption] – [None] / [AES-128] / [AES-256] [None] Sets the encryption method for streaming.
[Passphrase] – Sets the passphrase used for encryption for streaming.
[ARC] – [On] / [Off] [On] Enables/disables ARC when streaming.
[Reset] – [Execute] / [Cancel] –

Returns the settings to the default values.

[Execute]: Execute function.
[SRT-Caller 2] Same as [SRT-Caller 1] – –
[SRT-Caller 3] Same as [SRT-Caller 1] – –

[Network] – [Network Reset]

Resets the network settings.

Menu item Sub-item setting Description
[Reset] [Execute] / [Cancel] Resets the network settings.
[Execute]: Execute function.
TP1001670403