Adjusting the Iris

You can adjust the iris to adjust the brightness.

Adjusting the iris automatically

This function adjusts the brightness according to the subject.

Press and hold the IRIS AUTO button to set AUTO adjustment mode.

Hint

  • The same operation is supported by selecting [Auto] in the [Auto Iris] direct menu.
  • You can also assign [Auto Iris] to an assignable button.

Adjusting the iris manually

  1. Press and hold the IRIS AUTO button to set MANUAL adjustment mode.
  2. Turn the IRIS dial to make adjustments.

Hint

  • The same operation is supported by selecting an F-number in the direct menu and moving the multi selector up/down.
  • You can assign the iris adjustment function to the zoom ring using [Project] – [Lens Ring] – [Lens Ring] in the full menu. For details, see “Lens Rings.”

Note

  • If iris operation cannot be performed using the iris dial, check the [Project] – [IRIS Dial] – [IRIS Dial] setting in the full menu. For details, see “IRIS Dial.”

Temporarily adjusting automatically

Press an assignable button assigned with [Push Auto Iris] to automatically adjust the iris temporarily while the button is pressed.

The iris returns to the previous setting when you release the button.

TP1001670344