[Paint/Look] Menu

The following tables describe the function and settings of each menu item.

[Paint/Look] – [Scene File]

Sets settings related to scene files.

Note

  • Enabled in custom shooting mode only.
Menu item Sub-item setting Description
[Recall] – Loads a scene file stored in internal memory and applies the settings as the current image quality settings.
[Store] – Saves the current image quality state as a scene file in internal memory.
[Delete] – Deletes a scene file stored in internal memory.
[Preset Recall] When [Target Display] – [SDR(BT.709)] is selected in custom shooting mode: [S-Cinetone] / [ITU709] / [709tone]
When [Target Display] – [HDR(HLG)] is selected in custom shooting mode: [HLG Live] / [HLG Mild] / [HLG Natural]		 Applies preset image quality settings (non-rewritable) as the current image quality settings.

[Paint/Look] – [Base Look]

Sets settings related to the base look.

Menu item Sub-item setting Factory default value Description
[Select] When [Target Display] – [SDR(BT.709)] is selected in custom shooting mode: [S-Cinetone] / [ITU709] / [709tone]/User 1 to User 16
When [Target Display] – [HDR(HLG)] is selected in custom shooting mode: [HLG Live] / [HLG Mild] / [HLG Natural]/ User 1 to User 16
In log shooting mode: [s709] / [709(800%)] / [S-Log3] / User 1 to User 16		 When [Target Display] – [SDR(BT.709)] is selected in custom shooting mode: [ITU709]
When [Target Display] – [HDR(HLG)] is selected in custom shooting mode: [HLG Mild]
In log shooting mode: [s709]		 Selects a base look.
[Delete] – – Deletes the selected base look.
[Delete All] – – Deletes all base looks.
[Import from Media(B)] [Execute] / [Cancel] – Imports a base look file from a memory card inserted into card slot B.
[Execute]: Execute function.
[Import from Cloud(Private)] [Execute] / [Cancel] – Imports an uploaded base look file from the “C3 Portal” cloud service (private).
[Execute]: Execute function.
[Import from Cloud(Share)] [Execute] / [Cancel] – Imports an uploaded base look file from the “C3 Portal” cloud service (share).
[Execute]: Execute function.
[Input] [S-Gamut3/SLog3] / [S-Gamut3.Cine/SLog3] [S-Gamut3.Cine/SLog3] Sets the input color gamut for the base look selected using [Select].
[Output] [BT.709] / [HLG] [BT.709] Sets the output color gamut for the base look selected using [Select].
[AE Level Offset] 0EV / 1/3EV / 2/3EV / 1EV / 4/3EV / 5/3EV / 2EV 0EV Sets the exposure reference value for the base look selected using [Select].

[Paint/Look] – [Reset Paint Settings]

Resets the [Paint/Look] menu settings, excluding the base look.

Note

  • Enabled in custom shooting mode only.
Menu item Sub-item setting Description
[Reset without Base Look] [Execute] / [Cancel] Resets the [Paint/Look] menu settings, excluding the base look.
[Execute]: Execute function.

[Paint/Look] – [Black]

Sets black settings.

Note

  • Enabled in custom shooting mode only.
Menu item Sub-item setting Factory default value Description
[Master Black] −99.0 to +99.0 ±0.0 Sets the master black level.
[R Black] −99.0 to +99.0 ±0.0 Sets the R black level.
[B Black] −99.0 to +99.0 ±0.0 Sets the B black level.

[Paint/Look] – [Knee]

Sets knee correction settings.

Note

  • Enabled in custom shooting mode only.
Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] / --- When [Target Display] – [SDR(BT.709)] is selected: [On]
When [HDR(HLG)] is selected: [Off]

Turns knee correction on/off.

Hint

  • Enabled only when [Base Look] – [Select] – [ITU709], [709tone], [HLG Live], [HLG Mild], or [HLG Natural] is selected.
[Auto Knee] [On] / [Off] / --- When [Target Display] – [SDR(BT.709)] is selected: [On]
When [HDR(HLG)] is selected: [Off]

Turns auto knee on/off.

Hint

  • Enabled only when [Setting] is set to [On] and [Base Look] – [Select] – [ITU709] or [709tone] is selected.
[Point] 75% to 109% 90% Sets the knee point.
[Slope] −99 to +99 ±0 Sets the knee slope.

[Paint/Look] – [Detail]

Sets detail adjustment settings.

Note

  • Enabled in custom shooting mode only.
Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [On] Turns detail on/off.
[Level] −7 to +7 ±0 Sets the detail level.
[Manual Setting] [On] / [Off] / --- [Off] Turns detail manual adjustment on/off.
[H/V Ratio] −2 to +2 ±0 Sets the balance between vertical (V) and horizontal (H) detail for detail manual adjustment.
[B/W Balance] [Type1] / [Type2] / [Type3] / [Type4] / [Type5] [Type3] Sets the balance between detail for low-luminance areas (Black) and detail for high-luminance areas (White) for detail manual adjustment.
[Limit] 0 to 7 0 Sets the limit level of the detail for detail manual adjustment.
[Crispening] 0 to 7 0 Sets the crispening level for detail manual adjustment.
[High Light Detail] 0 to 4 0 Sets the detail level of high-luminance areas for detail manual adjustment.

[Paint/Look] – [Matrix]

Sets matrix correction settings.

Note

  • Enabled in custom shooting mode only.
Menu item Sub-item setting Factory default value Description
[User Matrix] [On] / [Off] [Off] Turns user matrix correction on/off.
[User Matrix Level] −99 to +99 ±0 Adjusts the color intensity of the entire image.
[User Matrix Phase] −99 to +99 ±0 Adjusts the color tone of the entire image.
[User Matrix R-G] −99 to +99 ±0 Sets a user-defined R-G user matrix.
[User Matrix R-B] −99 to +99 ±0 Sets a user-defined R-B user matrix.
[User Matrix G-R] −99 to +99 ±0 Sets a user-defined G-R user matrix.
[User Matrix G-B] −99 to +99 ±0 Sets a user-defined G-B user matrix.
[User Matrix B-R] −99 to +99 ±0 Sets a user-defined B-R user matrix.
[User Matrix B-G] −99 to +99 ±0 Sets a user-defined B-G user matrix.

[Paint/Look] – [Multi Matrix]

Sets multi matrix correction settings.

Note

  • Enabled in custom shooting mode only.
  • [Area Indication] is applied to all video outputs. Be aware of this fact when using a video output signal as the main signal.
  • Multi matrix correction adjusts the hue and saturation for each color axis, with the total hue subdivided into 16. When selecting the color axis you want to adjust, you can check where the color axis you want to adjust is located in the captured image by turning on [Area Indication]. After confirming the location, turn off [Area Indication] and then adjust the hue and saturation.
  • During recording operation, [Area Indication] is turned off (fixed).
  • When you switch from the multi matrix correction settings screen to another screen, [Area Indication] is automatically turned off.
  • While setting multi matrix correction, the DISPLAY button acts as an [Area Indication] select button. [Area Indication] toggles on/off each time you press the DISPLAY button.
Menu item Sub-item setting Factory default value Description
[Setting] [On] / [Off] [Off] Turns multi matrix correction on/off.
[Area Indication] [On] / [Off] [Off]

Turns on/off the display function that identifies the target area corresponding to the target color axis for adjustment selected in [Axis].
The parts of the captured image outside the target area are displayed in monotone.

Hint

  • While setting multi matrix correction, you can turn [Area Indication] on/off using the DISPLAY button.

Note

  • [Area Indication] is applied to all video outputs. Be aware of this fact when using a video output signal as the main signal.
[Reset] [Execute] / [Cancel] – Resets the hue and saturation settings of each color axis to the default values.
[Axis] B / B+ / MG− / MG / MG+ / R / R+ / YL− / YL / YL+ / G− / G / G+ / CY / CY+ / B− B Selects the target color axis for adjustment.
[Hue] −99 to +99 ±0 Sets the hue of the target color axis for adjustment selected in [Axis].
[Saturation] −99 to +99 ±0 Sets the saturation of the target color axis for adjustment selected in [Axis].
TP1001670397