Selecting the Audio Input Device

  1. Set the audio input using [CH1]/[CH2]/[CH3]/[CH4] – [Source] on the [Audio] status screen or [Audio] – [Audio Input] – [CH1 Input Select]/[CH2 Input Select]/[CH3 Input Select]/[CH4 Input Select] in the full menu.

    If using a microphone or XLR adaptor connected to the multi interface shoe, specify [Shoe CH1] or [Shoe CH2] (or [Shoe CH3] or [Shoe CH4]). For details about the XLR adaptor, see the following topic.
    Adding Audio Input Connectors

    Note

    • Audio is not recorded in Slow & Quick Motion mode.
    • When [CH1 Input Select] and [CH2 Input Select] are set to [Internal MIC], the audio recording level of both CH1 and CH2 is adjusted using the AUDIO LEVEL dial (CH1). When [CH3 Input Select] and [CH4 Input Select] are set to [Internal MIC], the audio recording level of both CH3 and CH4 is adjusted using [CH3 Input Level].
  2. Select the input audio source.

    Set the INPUT 1/INPUT 2 (LINE/MIC/MIC+48V) switches for the devices connected to the INPUT 1/INPUT 2 connectors, respectively.

    Connected device Switch position
    External audio source (e.g. mixer) LINE
    Dynamic microphone, battery-operated microphone MIC
    +48 V phantom power microphone MIC+48V
    • Selecting MIC+48V and connecting a microphone that is not compatible with a +48V source may damage the connected device. Check the setting before connecting the device.
    • If noise is a concern on connectors with no device connected, set the corresponding INPUT 1/INPUT 2 (LINE/MIC/MIC+48V) switches to LINE.
TP1001670352