[Audio] Menu

The following tables describe the function and settings of each menu item.

For details about settings, see the following topic.
Block Diagrams

[Audio] – [Audio Input]

Sets audio input settings.

Menu item Sub-item setting Factory default value Description
[CH1 Input Select] [INPUT1] / [INPUT3 (L)] / [Internal MIC] / [Shoe CH1] [Internal MIC] Switches the input source for CH1.
[CH2 Input Select] [INPUT1] / [INPUT2] / [INPUT3 (R)] / [Internal MIC] / [Shoe CH2] [Internal MIC] Switches the input source for CH2.
[CH3 Input Select] [Off] / [INPUT1] / [INPUT3 (L)] / [Internal MIC] / [Shoe CH1] / [Shoe CH3] [Internal MIC] Switches the input source for CH3.
[CH4 Input Select] [Off] / [INPUT1] / [INPUT2] / [INPUT3 (R)] / [Internal MIC] / [Shoe CH2] / [Shoe CH4] [Internal MIC] Switches the input source for CH4.
[INPUT1 MIC Reference] −80dB / −70dB / −60dB / −50dB / −40dB / −30dB −50dB Sets the reference recording level for XLR microphone input from INPUT 1.
[INPUT2 MIC Reference] −80dB / −70dB / −60dB / −50dB / −40dB / −30dB −50dB Sets the reference recording level for XLR microphone input from INPUT 2.
[Line Input Reference] +4dB / 0dB / −3dB / [EBUL] +4dB Selects the reference input level when the INPUT 1/INPUT 2 switch is set to LINE.
[Reference Level] −20dB / −18dB / −16dB / −12dB / [EBUL] −20dB Selects the recording level of the 1 kHz reference tone signal.
[CH1 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for CH1.
[CH2 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for CH2.
[CH3 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for CH3.
[CH4 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for CH4.
[CH3 Level Control] [Auto] / [Manual] [Auto]

Selects automatic audio input level adjustment or manual adjustment for CH3.

Note

  • If both [CH3 Input Select]/[CH4 Input Select] are set to [Internal MIC], CH4 is switched to automatic/manual in conjunction with this setting.
[CH4 Level Control] [Auto] / [Manual] [Auto]

Selects automatic audio input level adjustment or manual adjustment for CH4.

Note

  • If both [CH3 Input Select]/[CH4 Input Select] are set to [Internal MIC], CH4 is switched to automatic/manual in conjunction with the [CH3 Level Control] setting.
[CH3 Input Level] 0 to 99 49 Sets the input level for CH3.
[CH4 Input Level] 0 to 99 49 Sets the input level for CH4.
[Audio Input Level] 0 to 99 99 Sets the audio input level.
Can be used as the master volume, according to the settings of [CH1 Level] to [CH4 Level].
[Limiter Mode] [Off] / −6dB / −9dB / −12dB / −15dB / −17dB [Off] Selects the limiter characteristic for large input signals when adjusting the audio input level manually.
[CH1&2 AGC Mode] [Mono] / [Stereo] [Stereo] Sets the auto level adjustment mode for CH1 and CH2. When [Stereo] is selected, auto gain control is linked between channels.
[CH3&4 AGC Mode] [Mono] / [Stereo] [Stereo] Sets the auto level adjustment mode for CH3 and CH4. When [Stereo] is selected, auto gain control is linked between channels.
[AGC Spec] −6dB / −9dB / −12dB / −15dB / −17dB −6dB Selects the auto gain control characteristic.
[1kHz Tone on Color Bars] [On] / [Off] [Off]

Turns the 1 kHz reference tone signal on/off when displaying color bars.

Note

  • When set to [On], the 1 kHz reference tone signal is output on CH3/CH4, even if [CH3 Input Select]/[CH4 Input Select] are set to [Off].
[CH1 Level] Input without XLR adaptor: [Audio Input Level] / [Side] / [Level+Side]
Input with XLR adaptor: [Audio Input Level] / [Through]		 Input without XLR adaptor: [Level+Side]
Input with XLR adaptor: [Audio Input Level]

Sets the combination of audio input level adjustments enabled for CH1.

Note

  • [Side] refers to the AUDIO LEVEL (CH1) dial on the side of the unit. When [Level+Side] is selected, the audio recording level is determined by the combination of the [Audio Input Level] and dial settings.
[CH2 Level] Input without XLR adaptor: [Audio Input Level] / [Side] / [Level+Side]
Input with XLR adaptor: [Audio Input Level] / [Through]		 Input without XLR adaptor: [Level+Side]
Input with XLR adaptor: [Audio Input Level]

Sets the combination of audio input level adjustments enabled for CH2.

Note

  • [Side] refers to the AUDIO LEVEL (CH2) dial on the side of the unit. When [Level+Side] is selected, the audio recording level is determined by the combination of the [Audio Input Level] and dial settings.
[CH3 Level] Input without XLR adaptor: [Audio Input Level] / [CH3 Input Level] / [Level+CH3 Input Level]
Input with XLR adaptor: [Audio Input Level] / [Through]		 Input without XLR adaptor: [Level+CH3 Input Level]
Input with XLR adaptor: [Audio Input Level]		 Sets the combination of audio input level adjustments enabled for CH3.
[CH4 Level] Input without XLR adaptor: [Audio Input Level] / [CH4 Input Level] / [Level+CH4 Input Level]
Input with XLR adaptor: [Audio Input Level] / [Through]		 Input without XLR adaptor: [Level+CH4 Input Level]
Input with XLR adaptor: [Audio Input Level]		 Sets the combination of audio input level adjustments enabled for CH4.

[Audio] – [Audio Output]

Sets audio output settings.

Menu item Sub-item setting Factory default value Description
[Monitor CH] [CH1/CH2] / [CH3/CH4] / [MIX ALL] / [CH1] / [CH2] / [CH3] / [CH4] [CH1/CH2]

Selects the audio channel output to the headphone jack and built-in speaker.

Note

  • If audio for multiple channels is set for simultaneous output, the output level for each channel is reduced for output to prevent clipping.
[Headphone Out] [Mono] / [Stereo] [Stereo] Selects whether the headphone jack output is monaural or stereo.
[Alarm Level] 0 to 7 4 Adjusts the volume of the alarm.
[HDMI Output CH] [CH1/CH2] / [CH3/CH4] [CH1/CH2] Sets the combination of audio channels on the HDMI output.
TP1001670400