Connecting to the Internet via Wired LAN

You can connect to the Internet by connecting the unit and a wireless LAN router by wired LAN connection.

Illustration of connecting to Internet via wired LAN

A: Smartphone/tablet

B: Computer

C: Wireless LAN router

D: Internet

  1. Connect the network connector of the unit to a wireless LAN router using a LAN cable.
  2. Turn the unit on.

  3. Press the NETWORK button.

    The [Network] status screen appears.

    Hint

    • You can also press the MENU button and scroll the screen to display the status.

  4. Set [Wired LAN] – [Setting] to [Wired LAN].

    Note

    • The unit does not support simultaneous use of wireless LAN and wired LAN.

  5. Configure the following settings using [Network] – [Wired LAN] – [Detail Settings] in the full menu, as required, and select [Set].

    Configuration item Description
    [DHCP] Set the DHCP setting. When set to [On], the IP address is assigned to the unit automatically.
    To assign an IP address to the unit manually, set to [Off].
    [IP Address] Enter the IP address of the unit.
    This setting is available only when [DHCP] is set to [Off].
    [Subnet Mask] Enter the subnet mask of the unit.
    This setting is available only when [DHCP] is set to [Off].
    [Gateway] Enter the address of the gateway.
    This setting is available only when [DHCP] is set to [Off].
    [DNS Auto] Set whether to acquire DNS automatically. When set to [On], the DNS server address is automatically acquired.
    This setting is available only when [DHCP] is set to [On].
    [Primary DNS Server] Enter the address of the primary DNS server.
    This setting is available only when [DNS Auto] is set to [Off].
    [Secondary DNS Server] Enter the address of the secondary DNS server.
    This setting is available only when [DNS Auto] is set to [Off].

Hint

  • To use “Monitor & Control,” “Creators' App for enterprise,” or the “Camera Remote SDK” to control the unit from an external device, set [Wired LAN] – [Remote] to [Enable] on the [Network] status screen.
  • Press the [Show Authentication] button on the [Network] status screen to display the authentication information for connecting to the unit. Take care that the screen cannot be viewed and the QR code image cannot be copied by others.

Note

  • Always select [Set] after changing the connection settings. The settings are not applied if [Set] is not selected.
TP1001670376