Iris/ND Filter
This topic describes how to set the iris/ND filter.
- Can only be displayed if the connected camera is an ILME-FX6/MPC-2610.
-
Set the iris ring of the camera lens to the “A” position.
-
Tap (Menu) – [Monitoring].
The [Monitoring] screen appears.
-
Tap the mode selection area and select [Focus control].
The [Focus control] screen appears.
-
Tap the [IRIS/ND] tab.
The iris/ND filter setup screen appears.
-
Check the iris/ND filter setting and adjust the focus as required.
- The configurable items will depend on the connected camera. For details, see the Help Guide or operating instructions for the camera.
Tap [IRIS] – (Left step) or (Right step) to select an F value.
[Touch function]
- [Tracking AF]: Tap the camera image to specify the focus target for tracking.
- [Spot focus]: When [Focus mode] is set to [MF], tap the camera image to specify the position for which to adjust the focus.
- [Focus area]: When [Focus area] is set to [Zone] or [Spot], tap the camera image to specify the position to which to move the displayed focus area frame.
- [Off]: Disable touch operation on the camera image.
[Auto IRIS]
Select [On] or [Off].
[ND mode]
Select [Variable], [Preset], or [Step]. When [Variable], [Preset], or [Step is selected, the position of the ND filter cannot be selected.
Hint
- Select [Variable], [Preset], or [Step], depending on your camera.
[Auto ND]
Select [On] or [Off]. Selectable when [ND mode] is set to [Variable].
[ND]
Select a value in the range [1/128] to [1/4] or [Clear]. Selectable when [ND mode] is set to [Variable].
- Control bars
Scroll the left/right control bars to adjust the iris.
[Bar settings]
- [Left bar]/[Right bar]: Select the setup items ([FOCUS], [IRIS], [IRIS (Relative)], or [None]) to display on the left/right control bars. Place a check mark in [Reverse] to switch the ascending/descending orientation of the scale on the control bars. By default, only the right control bar is displayed.
- [Focus distance display]: Sets the display units.
- [Detection/Tracking frame color]: Set the face/eye detection frame and tracking frame colors.
[Max], [Min]
Set the current set value to the upper limit or lower limit. Scrolling the control bar beyond the limits becomes disabled.
[x0.1] to [x1.5]
Select the scrolling speed of the control bars.
[50%] to [350%]
Select the display magnification of the control bars.