The Control for HDMI function does not work properly.
- Check the HDMI connection with the receiver (refer to the supplied Operating Instructions).
- Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of the TV.
- Wait for a while, and then try again. If you unplug the receiver, it will take a while before the operation is completed. Wait for 15 seconds or longer, and then try again.
- If you unplug the HDMI cable or change the connection, repeat the procedures of “Preparing to use the “BRAVIA” Sync function.”
- Make sure your TV is connected to the HDMI TV OUT jack of the receiver.
- Press AMP MENU, then set “<HDMI>” - “CTRL.HDMI” to “CTRL ON” on the display panel.
- Make sure the connected device supports the Control for HDMI function.
- Enable the Control for HDMI function on the connected device. For details, refer to the operating instructions of the connected device.
- The types and number of devices that can be controlled by the “BRAVIA” Sync feature are restricted by the HDMI CEC standard as follows:
- Recording devices (Blu-ray Disc recorders, DVD recorders, etc.): up to 3 devices
- Playback devices (Blu-ray Disc players, DVD players, etc.): up to 3 devices
- Tuner-related devices: up to 4 devices (one of them is used by this receiver)
- Audio system (receiver/headphones): up to 1 device (used by this receiver)
