Enjoying video/sound from the connected device

  1. Switch the input of the TV to the input to which the receiver is connected.
  2. Press HOME.

    The home menu is displayed on the TV screen.
    Depending on the TV, the home menu may take some time to appear on the TV screen.

  3. Select [Watch] or [Listen] from the home menu.

    The menu item list appears on the TV screen.

  4. Select the device you want.
  5. Turn on the device and start playback.
  6. Press +/– to adjust the volume level.

    You can also use MASTER VOLUME on the receiver.

  7. Press 2CH/DIRECT, A.F.D., MOVIE or MULTI ST. to enjoy the surround sound.

    You can also use 2CH/DIRECT, A.F.D., MOVIE or MULTI ST. on the receiver.

Note

  • Before you turn off the receiver, be sure to turn down the volume level to avoid damaging your speakers.
  • When you turn on the receiver for the first time, it may take up to one minute until sound is output from the receiver.

Hint

  • You can select the device you want by pressing the input buttons on the remote control or the receiver.
  • You can adjust the volume level differently using the MASTER VOLUME knob on the receiver or the +/– buttons on the remote control.
    To turn the volume up or down quickly
    • Turn the knob quickly.
    • Press and hold one of the buttons.
    To make fine adjustments
    • Turn the knob slowly.
    • Press one of the buttons and release it immediately.
Go to Page Top