If you use a TV compatible with Dolby Digital Plus output

The receiver can receive Dolby Atmos signals in the Dolby Digital Plus format, not only when audio signals are input from the HDMI input jack but also from a TV connected to the receiver by using the Audio Return Channel (ARC) function.

Turn on the ARC function to enable the transmission of Dolby Digital Plus signals. This receiver is designed to activate the ARC function separately even if [Control for HDMI] is set to [Off] in the [HDMI Setup] menu. In this case, set the receiver by the following procedure.

  1. Turn on the Control for HDMI function of the TV.
  2. Change the setting for the audio output of the TV so that the TV can output the Dolby Atmos signals.

    For details on setting the TV, refer to the operating instructions of the TV.

  3. Set [Audio Return Channel] to [On] in the [HDMI Setup] menu on the receiver.
  4. Set [Input Mode] for the TV input to [Auto] in the [Input Setup] menu on the receiver.
  5. Set the HDMI OUTPUT setting to [HDMI A] on the receiver.
  6. Turn off the Control for HDMI function for all devices connected to the receiver except the TV.

    For details, refer to the operating instructions of the connected devices.

  7. Turn off any settings for the operation of other devices on the TV’s remote control.

    For details on setting the TV, refer to the operating instructions of the TV.

  8. Switch the input of the receiver to [TV].

Note

  • The ARC function only works on the TV connected to the HDMI OUT A jack.
  • If the Control for HDMI function is activated on the source devices connected to the receiver or the TV, the interlocking functions only work between the TV and the source devices.