Speaker configuration and speaker pattern settings
Select the speaker pattern using [Speaker Pattern] in the [Setup] - [Speaker Setup] menu according to the speaker configuration which you are using.
| Speaker configuration in each zone | [SB Speaker Assign] (*1) | [Height1 SP Assign] (*2) | Speaker pattern to be selected in [Speaker Pattern] | |
|---|---|---|---|---|
| Main zone | Zone 2 | |||
| 5.1.4-channel speaker system using top front and top rear speakers | Not used | [Off] | [Off] | [5.1.4 (TF+TR)] |
| 7.1.2-channel speaker system using top middle speakers | Not used | [Off] | [Off] | [7.1.2 (TM)] |
| 7.1.2-channel speaker system using front Dolby Atmos enabled speaker | Not used | [Off] | [Off] | [7.1.2 (FD)] |
| 7.1.4-channel speaker system using an additional stereo power amplifier | Not used | [Off] | [Off] | [7.1.4 (TF+TR)] |
| 7.1-channel speaker system with Zone 2 connection | 2-channel | [Off] | [Zone2] | [7.1] |
*1 You can only set [SB Speaker Assign] if the speaker pattern is set to a setting that does not have surround back speakers.
*2 You can only set [Height1 SP Assign] if the speaker pattern is set to a setting that does not have the following speakers:
- Top front speakers
- Top middle speakers
- Top rear speakers
- Front high speakers
- Rear high speakers
- Front Dolby Atmos enabled speakers
- Surround Dolby Atmos enabled speakers
- Surround back Dolby Atmos enabled speakers
