Enjoying sound using another amplifier in Zone 2 and/or Zone 3

You can enjoy sound from the amplifier in Zone 2 and/or Zone 3 by the following procedure.

  1. Select [Zone Controls] - [Zone2 Power] or [Zone3 Power] from the home menu.
  2. Select [On].
    The selected zone is activated.
  3. Turn on the amplifier in Zone 2 or Zone 3.
  4. Select [Zone Controls] - [Zone2 Input] or [Zone3 Input] from the home menu.
  5. Select the source signals you want to output.
  6. Adjust to a suitable volume level.

    Adjust the volume level using the amplifier in Zone 2 or Zone 3. If you set [Zone2 Line Out] or [Zone3 Line Out] to [Variable], you can also adjust the volume level in Zone 2 or Zone 3 using [Zone Controls] - [Zone2 Volume] or [Zone3 Volume] from the home menu.

Hint

  • You can also activate Zone 2 or Zone 3 by pressing ZONE2 (power) or ZONE3 (power) on the remote control.
  • You can also select source signals you want to output using the input buttons while [ZONE2 INPUT - xxxx (input name)] or [ZONE3 INPUT - xxxx (input name)] is shown on the display panel.
  • You can also adjust volume using MASTER VOLUME on the receiver while [ZONE2 INPUT - xxxx (input name)] or [ZONE3 INPUT - xxxx (input name)] is shown on the display panel.


To exit Zone 2/3 operation

Select [Zone Controls] - [Zone2 Power] or [Zone3 Power] from the home menu, then select [Off].

Available input for Zone 2/3 operations

See “Available input sources for each zone.”