Enjoying more natural sound with speakers installed in the ceiling (In-Ceiling Speaker Mode)
Set whether or not to use In-Ceiling Speaker Mode with the current input.
In a setup where the front and center speakers are installed in the ceiling, lowering the audio output position to the screen height allows you to enjoy a more natural experience.
In a setup where the front and center speakers are installed in the ceiling, lowering the audio output position to the screen height allows you to enjoy a more natural experience.
- Select [Setup] - [Audio Setup] from the home menu.
- Select [In-Ceiling Speaker Mode].
- Select the setting you want.
- Front & Center : Lowers the audio output position for both the front and center speakers installed in ceiling to the screen height.
- Front : Lowers the audio output position for the front speakers installed in ceiling to the screen height.
- Off : Does not activate this function.
Note
- This function does not work in the following cases:
- [Direct] is being used and an analog input is selected.
- Dolby Atmos enabled speakers are used.
- Dolby Atmos is being decoded.
- [Pure Direct] is set to [On].
- This function may not work depending on the audio format.
- The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals depending on the audio format.
Hint
- You can also switch this function on/off for each input on the Input Setup screen.
- You can also select [In-Ceiling Speaker Mode] in [Sound Effects] from the home menu.
- You can also switch the function on/off by pressing IN-CEILING SP on the remote control or the receiver.
- To obtain optimal effects in the listening environment, configure the [Ceiling Height] setting and perform Auto Calibration.