Speaker patterns and terminals to be connected
When you connect speakers to the receiver, refer to the following table.
You can use the following table to confirm the speaker patterns supported by the receiver as well as the speaker terminals to which the speakers of each speaker pattern are to be connected.
To set the speaker pattern, select [Setup] - [Speaker Setup] - [Speaker Pattern] from the home menu.
The abbreviations and symbol used in the list are as follows.
- FH: Front high speakers
- TF: Top front speakers
- TM: Top middle speakers
- TR: Top rear speakers
- RH: Rear high speakers
- FD: Front Dolby Atmos enabled speakers
- SRD: Surround Dolby Atmos enabled speakers
- SBD: Surround back Dolby Atmos enabled speakers
- △: There are no speaker terminals that can be assigned and output is enabled from the PRE OUT jacks only.
- SB: SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals
- H1: SPEAKERS HEIGHT 1 (ZONE 2) terminals
What the numbers in the speaker pattern indicate:
Number of speakers located at listener’s level
Number of subwoofers
Number of height or overhead (top) speakers
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 2.0 | ○ | - | - | - | - | - | - | - | SB or H1 | SB | SB |
| 2.0.2 (TM) | ○ | - | - | - | - | ○ (TM) | - | - | SB | SB | SB |
| 2.0.2 (FD) | ○ | - | - | - | - | ○ (FD) | - | - | SB | SB | SB |
| 2.1 | ○ | - | - | - | - | - | - | ○ | SB or H1 | SB | SB |
| 2.1.2 (TM) | ○ | - | - | - | - | ○ (TM) | - | ○ | SB | SB | SB |
| 2.1.2 (FD) | ○ | - | - | - | - | ○ (FD) | - | ○ | SB | SB | SB |
| 3.0 | ○ | ○ | - | - | - | - | - | - | SB or H1 | SB | SB |
| 3.0.2 (TM) | ○ | ○ | - | - | - | ○ (TM) | - | - | SB | SB | SB |
| 3.0.2 (FD) | ○ | ○ | - | - | - | ○ (FD) | - | - | SB | SB | SB |
| 3.1 | ○ | ○ | - | - | - | - | - | ○ | SB or H1 | SB | SB |
| 3.1.2 (TM) | ○ | ○ | - | - | - | ○ (TM) | - | ○ | SB | SB | SB |
| 3.1.2 (FD) | ○ | ○ | - | - | - | ○ (FD) | - | ○ | SB | SB | SB |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 4.0 | ○ | - | ○ | - | - | - | - | - | SB or H1 | SB | SB |
| 4.0.2 (FH) | ○ | - | ○ | - | - | ○ (FH) | - | - | SB | SB | SB |
| 4.0.2 (TM) | ○ | - | ○ | - | - | ○ (TM) | - | - | SB | SB | SB |
| 4.0.2 (FD) | ○ | - | ○ | - | - | ○ (FD) | - | - | SB | SB | SB |
| 4.0.2 (SRD) | ○ | - | ○ | - | - | ○ (SRD) | - | - | SB | SB | SB |
| 4.0.4 (FH+TM) | ○ | - | ○ | - | - | ○ (FH) | ○ (TM) (*2) | - | SB | SB | SB |
| 4.0.4 (FH+TR) | ○ | - | ○ | - | - | ○ (FH) | ○ (TR) (*2) | - | SB | SB | SB |
| 4.0.4 (FH+RH) | ○ | - | ○ | - | - | ○ (FH) | ○ (RH) (*2) | - | SB | SB | SB |
| 4.0.4 (TF+TM) | ○ | - | ○ | - | - | ○ (TF) | ○ (TM) (*2) | - | SB | SB | SB |
| 4.0.4 (TF+TR) | ○ | - | ○ | - | - | ○ (TF) | ○ (TR) (*2) | - | SB | SB | SB |
| 4.0.4 (TF+RH) | ○ | - | ○ | - | - | ○ (TF) | ○ (RH) (*2) | - | SB | SB | SB |
| 4.0.4 (TM+TR) | ○ | - | ○ | - | - | ○ (TM) | ○ (TR) (*2) | - | SB | SB | SB |
| 4.0.4 (TM+RH) | ○ | - | ○ | - | - | ○ (TM) | ○ (RH) (*2) | - | SB | SB | SB |
| 4.0.4 (FD+SRD) | ○ | - | ○ | - | - | ○ (FD) | ○ (SRD) (*2) | - | SB | SB | SB |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 4.1 | ○ | - | ○ | - | - | - | - | ○ | SB or H1 | SB | SB |
| 4.1.2 (FH) | ○ | - | ○ | - | - | ○ (FH) | - | ○ | SB | SB | SB |
| 4.1.2 (TM) | ○ | - | ○ | - | - | ○ (TM) | - | ○ | SB | SB | SB |
| 4.1.2 (FD) | ○ | - | ○ | - | - | ○ (FD) | - | ○ | SB | SB | SB |
| 4.1.2 (SRD) | ○ | - | ○ | - | - | ○ (SRD) | - | ○ | SB | SB | SB |
| 4.1.4 (FH+TM) | ○ | - | ○ | - | - | ○ (FH) | ○ (TM) (*2) | ○ | SB | SB | SB |
| 4.1.4 (FH+TR) | ○ | - | ○ | - | - | ○ (FH) | ○ (TR) (*2) | ○ | SB | SB | SB |
| 4.1.4 (FH+RH) | ○ | - | ○ | - | - | ○ (FH) | ○ (RH) (*2) | ○ | SB | SB | SB |
| 4.1.4 (TF+TM) | ○ | - | ○ | - | - | ○ (TF) | ○ (TM) (*2) | ○ | SB | SB | SB |
| 4.1.4 (TF+TR) | ○ | - | ○ | - | - | ○ (TF) | ○ (TR) (*2) | ○ | SB | SB | SB |
| 4.1.4 (TF+RH) | ○ | - | ○ | - | - | ○ (TF) | ○ (RH) (*2) | ○ | SB | SB | SB |
| 4.1.4 (TM+TR) | ○ | - | ○ | - | - | ○ (TM) | ○ (TR) (*2) | ○ | SB | SB | SB |
| 4.1.4 (TM+RH) | ○ | - | ○ | - | - | ○ (TM) | ○ (RH) (*2) | ○ | SB | SB | SB |
| 4.1.4 (FD+SRD) | ○ | - | ○ | - | - | ○ (FD) | ○ (SRD) (*2) | ○ | SB | SB | SB |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 5.0 | ○ | ○ | ○ | - | - | - | - | - | SB or H1 | SB | SB |
| 5.0.2 (FH) | ○ | ○ | ○ | - | - | ○ (FH) | - | - | SB | SB | SB |
| 5.0.2 (TM) | ○ | ○ | ○ | - | - | ○ (TM) | - | - | SB | SB | SB |
| 5.0.2 (FD) | ○ | ○ | ○ | - | - | ○ (FD) | - | - | SB | SB | SB |
| 5.0.2 (SRD) | ○ | ○ | ○ | - | - | ○ (SRD) | - | - | SB | SB | SB |
| 5.0.4 (FH+TM) | ○ | ○ | ○ | - | - | ○ (FH) | ○ (TM) (*2) | - | SB | SB | SB |
| 5.0.4 (FH+TR) | ○ | ○ | ○ | - | - | ○ (FH) | ○ (TR) (*2) | - | SB | SB | SB |
| 5.0.4 (FH+RH) | ○ | ○ | ○ | - | - | ○ (FH) | ○ (RH) (*2) | - | SB | SB | SB |
| 5.0.4 (TF+TM) | ○ | ○ | ○ | - | - | ○ (TF) | ○ (TM) (*2) | - | SB | SB | SB |
| 5.0.4 (TF+TR) | ○ | ○ | ○ | - | - | ○ (TF) | ○ (TR) (*2) | - | SB | SB | SB |
| 5.0.4 (TF+RH) | ○ | ○ | ○ | - | - | ○ (TF) | ○ (RH) (*2) | - | SB | SB | SB |
| 5.0.4 (TM+TR) | ○ | ○ | ○ | - | - | ○ (TM) | ○ (TR) (*2) | - | SB | SB | SB |
| 5.0.4 (TM+RH) | ○ | ○ | ○ | - | - | ○ (TM) | ○ (RH) (*2) | - | SB | SB | SB |
| 5.0.4 (FD+SRD) | ○ | ○ | ○ | - | - | ○ (FD) | ○ (SRD) (*2) | - | SB | SB | SB |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 5.1 | ○ | ○ | ○ | - | - | - | - | ○ | SB or H1 | SB | SB |
| 5.1.2 (FH) | ○ | ○ | ○ | - | - | ○ (FH) | - | ○ | SB | SB | SB |
| 5.1.2 (TM) | ○ | ○ | ○ | - | - | ○ (TM) | - | ○ | SB | SB | SB |
| 5.1.2 (FD) | ○ | ○ | ○ | - | - | ○ (FD) | - | ○ | SB | SB | SB |
| 5.1.2 (SRD) | ○ | ○ | ○ | - | - | ○ (SRD) | - | ○ | SB | SB | SB |
| 5.1.4 (FH+TM) | ○ | ○ | ○ | - | - | ○ (FH) | ○ (TM) (*2) | ○ | SB | SB | SB |
| 5.1.4 (FH+TR) | ○ | ○ | ○ | - | - | ○ (FH) | ○ (TR) (*2) | ○ | SB | SB | SB |
| 5.1.4 (FH+RH) | ○ | ○ | ○ | - | - | ○ (FH) | ○ (RH) (*2) | ○ | SB | SB | SB |
| 5.1.4 (TF+TM) | ○ | ○ | ○ | - | - | ○ (TF) | ○ (TM) (*2) | ○ | SB | SB | SB |
| 5.1.4 (TF+TR) | ○ | ○ | ○ | - | - | ○ (TF) | ○ (TR) (*2) | ○ | SB | SB | SB |
| 5.1.4 (TF+RH) | ○ | ○ | ○ | - | - | ○ (TF) | ○ (RH) (*2) | ○ | SB | SB | SB |
| 5.1.4 (TM+TR) | ○ | ○ | ○ | - | - | ○ (TM) | ○ (TR) (*2) | ○ | SB | SB | SB |
| 5.1.4 (TM+RH) | ○ | ○ | ○ | - | - | ○ (TM) | ○ (RH) (*2) | ○ | SB | SB | SB |
| 5.1.4 (FD+SRD) | ○ | ○ | ○ | - | - | ○ (FD) | ○ (SRD) (*2) | ○ | SB | SB | SB |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 5.0 (SB) | ○ | - | ○ | ○ | - | - | - | - | H1 | Not available | Not available |
| 5.0.2 (SB+FH) | ○ | - | ○ | ○ | - | ○ (FH) | - | - | Only PRE OUT | Not available | Not available |
| 5.0.2 (SB+TM) | ○ | - | ○ | ○ | - | ○ (TM) | - | - | Only PRE OUT | Not available | Not available |
| 5.0.2 (SB+FD) | ○ | - | ○ | ○ | - | ○ (FD) | - | - | Only PRE OUT | Not available | Not available |
| 5.0.2 (SB+SRD) | ○ | - | ○ | ○ | - | ○ (SRD) | - | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+FH+TM) | ○ | - | ○ | ○ | - | ○ (FH) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+FH+TR) | ○ | - | ○ | ○ | - | ○ (FH) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+FH+RH) | ○ | - | ○ | ○ | - | ○ (FH) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+TF+TM) | ○ | - | ○ | ○ | - | ○ (TF) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+TF+TR) | ○ | - | ○ | ○ | - | ○ (TF) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+TF+RH) | ○ | - | ○ | ○ | - | ○ (TF) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+TM+TR) | ○ | - | ○ | ○ | - | ○ (TM) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+TM+RH) | ○ | - | ○ | ○ | - | ○ (TM) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 5.0.4 (SB+FD+SRD) | ○ | - | ○ | ○ | - | ○ (FD) | △ (SRD) | - | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 5.1 (SB) | ○ | - | ○ | ○ | - | - | - | ○ | H1 | Not available | Not available |
| 5.1.2 (SB+FH) | ○ | - | ○ | ○ | - | ○ (FH) | - | ○ | Only PRE OUT | Not available | Not available |
| 5.1.2 (SB+TM) | ○ | - | ○ | ○ | - | ○ (TM) | - | ○ | Only PRE OUT | Not available | Not available |
| 5.1.2 (SB+FD) | ○ | - | ○ | ○ | - | ○ (FD) | - | ○ | Only PRE OUT | Not available | Not available |
| 5.1.2 (SB+SRD) | ○ | - | ○ | ○ | - | ○ (SRD) | - | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+FH+TM) | ○ | - | ○ | ○ | - | ○ (FH) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+FH+TR) | ○ | - | ○ | ○ | - | ○ (FH) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+FH+RH) | ○ | - | ○ | ○ | - | ○ (FH) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+TF+TM) | ○ | - | ○ | ○ | - | ○ (TF) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+TF+TR) | ○ | - | ○ | ○ | - | ○ (TF) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+TF+RH) | ○ | - | ○ | ○ | - | ○ (TF) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+TM+TR) | ○ | - | ○ | ○ | - | ○ (TM) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+TM+RH) | ○ | - | ○ | ○ | - | ○ (TM) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 5.1.4 (SB+FD+SRD) | ○ | - | ○ | ○ | - | ○ (FD) | △ (SRD) | ○ | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 6.0 (SB) | ○ | ○ | ○ | ○ | - | - | - | - | H1 | Not available | Not available |
| 6.0.2 (SB+FH) | ○ | ○ | ○ | ○ | - | ○ (FH) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (SB+TM) | ○ | ○ | ○ | ○ | - | ○ (TM) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (SB+FD) | ○ | ○ | ○ | ○ | - | ○ (FD) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (SB+SRD) | ○ | ○ | ○ | ○ | - | ○ (SRD) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+FH+TM) | ○ | ○ | ○ | ○ | - | ○ (FH) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+FH+TR) | ○ | ○ | ○ | ○ | - | ○ (FH) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+FH+RH) | ○ | ○ | ○ | ○ | - | ○ (FH) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+TF+TM) | ○ | ○ | ○ | ○ | - | ○ (TF) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+TF+TR) | ○ | ○ | ○ | ○ | - | ○ (TF) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+TF+RH) | ○ | ○ | ○ | ○ | - | ○ (TF) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+TM+TR) | ○ | ○ | ○ | ○ | - | ○ (TM) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+TM+RH) | ○ | ○ | ○ | ○ | - | ○ (TM) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (SB+FD+SRD) | ○ | ○ | ○ | ○ | - | ○ (FD) | △ (SRD) | - | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 6.1 (SB) | ○ | ○ | ○ | ○ | - | - | - | ○ | H1 | Not available | Not available |
| 6.1.2 (SB+FH) | ○ | ○ | ○ | ○ | - | ○ (FH) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (SB+TM) | ○ | ○ | ○ | ○ | - | ○ (TM) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (SB+FD) | ○ | ○ | ○ | ○ | - | ○ (FD) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (SB+SRD) | ○ | ○ | ○ | ○ | - | ○ (SRD) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+FH+TM) | ○ | ○ | ○ | ○ | - | ○ (FH) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+FH+TR) | ○ | ○ | ○ | ○ | - | ○ (FH) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+FH+RH) | ○ | ○ | ○ | ○ | - | ○ (FH) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+TF+TM) | ○ | ○ | ○ | ○ | - | ○ (TF) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+TF+TR) | ○ | ○ | ○ | ○ | - | ○ (TF) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+TF+RH) | ○ | ○ | ○ | ○ | - | ○ (TF) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+TM+TR) | ○ | ○ | ○ | ○ | - | ○ (TM) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+TM+RH) | ○ | ○ | ○ | ○ | - | ○ (TM) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (SB+FD+SRD) | ○ | ○ | ○ | ○ | - | ○ (FD) | △ (SRD) | ○ | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 6.0 | ○ | - | ○ | - | ○ | - | - | - | H1 | Not available | Not available |
| 6.0.2 (FH) | ○ | - | ○ | - | ○ | ○ (FH) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (TM) | ○ | - | ○ | - | ○ | ○ (TM) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (FD) | ○ | - | ○ | - | ○ | ○ (FD) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (SRD) | ○ | - | ○ | - | ○ | ○ (SRD) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.2 (SBD) | ○ | - | ○ | - | ○ | ○ (SBD) | - | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (FH+TM) | ○ | - | ○ | - | ○ | ○ (FH) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (FH+TR) | ○ | - | ○ | - | ○ | ○ (FH) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (FH+RH) | ○ | - | ○ | - | ○ | ○ (FH) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (TF+TM) | ○ | - | ○ | - | ○ | ○ (TF) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (TF+TR) | ○ | - | ○ | - | ○ | ○ (TF) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (TF+RH) | ○ | - | ○ | - | ○ | ○ (TF) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (TM+TR) | ○ | - | ○ | - | ○ | ○ (TM) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (TM+RH) | ○ | - | ○ | - | ○ | ○ (TM) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 6.0.4 (FD+SBD) | ○ | - | ○ | - | ○ | ○ (FD) | △ (SBD) | - | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 6.1 | ○ | - | ○ | - | ○ | - | - | ○ | H1 | Not available | Not available |
| 6.1.2 (FH) | ○ | - | ○ | - | ○ | ○ (FH) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (TM) | ○ | - | ○ | - | ○ | ○ (TM) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (FD) | ○ | - | ○ | - | ○ | ○ (FD) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (SRD) | ○ | - | ○ | - | ○ | ○ (SRD) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.2 (SBD) | ○ | - | ○ | - | ○ | ○ (SBD) | - | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (FH+TM) | ○ | - | ○ | - | ○ | ○ (FH) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (FH+TR) | ○ | - | ○ | - | ○ | ○ (FH) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (FH+RH) | ○ | - | ○ | - | ○ | ○ (FH) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (TF+TM) | ○ | - | ○ | - | ○ | ○ (TF) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (TF+TR) | ○ | - | ○ | - | ○ | ○ (TF) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (TF+RH) | ○ | - | ○ | - | ○ | ○ (TF) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (TM+TR) | ○ | - | ○ | - | ○ | ○ (TM) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (TM+RH) | ○ | - | ○ | - | ○ | ○ (TM) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 6.1.4 (FD+SBD) | ○ | - | ○ | - | ○ | ○ (FD) | △ (SBD) | ○ | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 7.0 | ○ | ○ | ○ | - | ○ | - | - | - | H1 | Not available | Not available |
| 7.0.2 (FH) | ○ | ○ | ○ | - | ○ | ○ (FH) | - | - | Only PRE OUT | Not available | Not available |
| 7.0.2 (TM) | ○ | ○ | ○ | - | ○ | ○ (TM) | - | - | Only PRE OUT | Not available | Not available |
| 7.0.2 (FD) | ○ | ○ | ○ | - | ○ | ○ (FD) | - | - | Only PRE OUT | Not available | Not available |
| 7.0.2 (SRD) | ○ | ○ | ○ | - | ○ | ○ (SRD) | - | - | Only PRE OUT | Not available | Not available |
| 7.0.2 (SBD) | ○ | ○ | ○ | - | ○ | ○ (SBD) | - | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (FH+TM) | ○ | ○ | ○ | - | ○ | ○ (FH) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (FH+TR) | ○ | ○ | ○ | - | ○ | ○ (FH) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (FH+RH) | ○ | ○ | ○ | - | ○ | ○ (FH) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (TF+TM) | ○ | ○ | ○ | - | ○ | ○ (TF) | △ (TM) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (TF+TR) | ○ | ○ | ○ | - | ○ | ○ (TF) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (TF+RH) | ○ | ○ | ○ | - | ○ | ○ (TF) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (TM+TR) | ○ | ○ | ○ | - | ○ | ○ (TM) | △ (TR) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (TM+RH) | ○ | ○ | ○ | - | ○ | ○ (TM) | △ (RH) | - | Only PRE OUT | Not available | Not available |
| 7.0.4 (FD+SBD) | ○ | ○ | ○ | - | ○ | ○ (FD) | △ (SBD) | - | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
| Speaker pattern | SPEAKERS terminals/PRE OUT jacks | Zone 2 connection (*1) | Front B speaker connection (*1) | Bi-amplifier connection (*1) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| FRONT A | CENTER | SURROUND | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (single) | SURROUND BACK (FRONT B/BI-AMP/ZONE 2) (L/R) | HEIGHT 1 (ZONE 2) | HEIGHT 2 | SUBWOOFER | ||||
| 7.1 | ○ | ○ | ○ | - | ○ | - | - | ○ | H1 | Not available | Not available |
| 7.1.2 (FH) | ○ | ○ | ○ | - | ○ | ○ (FH) | - | ○ | Only PRE OUT | Not available | Not available |
| 7.1.2 (TM) | ○ | ○ | ○ | - | ○ | ○ (TM) | - | ○ | Only PRE OUT | Not available | Not available |
| 7.1.2 (FD) | ○ | ○ | ○ | - | ○ | ○ (FD) | - | ○ | Only PRE OUT | Not available | Not available |
| 7.1.2 (SRD) | ○ | ○ | ○ | - | ○ | ○ (SRD) | - | ○ | Only PRE OUT | Not available | Not available |
| 7.1.2 (SBD) | ○ | ○ | ○ | - | ○ | ○ (SBD) | - | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (FH+TM) | ○ | ○ | ○ | - | ○ | ○ (FH) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (FH+TR) | ○ | ○ | ○ | - | ○ | ○ (FH) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (FH+RH) | ○ | ○ | ○ | - | ○ | ○ (FH) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (TF+TM) | ○ | ○ | ○ | - | ○ | ○ (TF) | △ (TM) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (TF+TR) | ○ | ○ | ○ | - | ○ | ○ (TF) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (TF+RH) | ○ | ○ | ○ | - | ○ | ○ (TF) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (TM+TR) | ○ | ○ | ○ | - | ○ | ○ (TM) | △ (TR) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (TM+RH) | ○ | ○ | ○ | - | ○ | ○ (TM) | △ (RH) | ○ | Only PRE OUT | Not available | Not available |
| 7.1.4 (FD+SBD) | ○ | ○ | ○ | - | ○ | ○ (FD) | △ (SBD) | ○ | Only PRE OUT | Not available | Not available |
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select one of the following three connection methods: “Zone 2 connection,” “front B speaker connection,” or “bi-amplifier connection.”
*2 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
