Save/Load Settings
You can save/load camera settings to/from a memory card. You can also load settings from another camera of the same model.
- MENU →
(Setup) → [Reset/Save Settings] → [Save/Load Settings] → desired item.
Menu item details
- Load:
- Loads the settings from a memory card to this camera.
- Save:
- Saves the current settings of this camera to a memory card.
- Delete:
- Deletes the settings saved on a memory card.
Settings that cannot be saved
The following setting parameters cannot be saved using the [Save/Load Settings] function. (Menu items without setting parameters, such as, [Focus Magnifier], are not listed.)
-
(Shooting) - IPTC Information
- Copyright Info
-
(Exposure/Color) - External Flash Set.
-
White Balance: Custom 1/Custom 2/Custom 3
-
(Focus) - Face Memory
-
(Network) - FTP Transfer Func.*
- WPS Push
- Access Point Set.
- Wi-Fi Frequency Band
-
IP Address Setting - Edit Device Name
- Import Root Certificate
-
Security(IPsec)
* You can save or load settings under [FTP Transfer Func.] by selecting MENU →
(Network) → [Transfer/Remote] → [FTP Transfer Func.] → [Save/Load FTP Settings]. For details, refer to the “FTP Help Guide.”
https://rd1.sony.net/help/di/ftp_2040/h_zz/ -
(Setup) - Area/Date/Time Setting
Note
- You can save up to 10 settings per memory card. When 10 settings have been already saved, you cannot perform [Save New]. Delete the existing settings using [Delete], or overwrite them.
- Only Slot 1 is used for saving or loading data. You cannot change the saving/loading destination slot.
- You cannot load settings from a camera of a different model.
-
You can use this function to save settings registered to [
Camera Set. Memory]. However, [Save/Load Settings] is unavailable when the mode dial is set to 1/2/3 (
Recall Camera Setting). Set the mode dial to a position other than 1/2/3 before using this function.
