Gamma Disp. Assist Typ.

still image, movie

Selects the conversion type for [Gamma Display Assist].

  1. MENU → (Setup) → [Display Option] → [Gamma Disp. Assist Typ.] → desired setting.

Menu item details

Auto:
  • Displays images with effects as follows according to the gamma or color mode set in [Picture Profile].
    • When the gamma is set to [S-Log2]: [S-Log2→709(800%)]
    • When the gamma is set to [S-Log3]: [S-Log3→709(800%)]
    • When the gamma is set to [HLG], [HLG1], [HLG2], or [HLG3], and the color mode is set to [BT.2020]: [HLG(BT.2020)]
    • When the gamma is set to [HLG], [HLG1], [HLG2], or [HLG3], and the color mode is set to [709]: [HLG(709)]
  • Displays images with an [HLG(BT.2020)] effect when shooting HLG still images with [HLG Still Image] set to [On].
  • Displays images with an [S-Log3→709(800%)] effect when outputting RAW movies to another device connected via HDMI during movie shooting.
S-Log2→709(800%):
Displays images with an S-Log2 gamma reproducing contrast equivalent to ITU709 (800%).
S-Log3→709(800%):
Displays images with an S-Log3 gamma reproducing contrast equivalent to ITU709 (800%).
HLG(BT.2020):
Displays images after adjusting the image quality of the monitor or viewfinder to a quality that is almost the same as when images are displayed on an [HLG(BT.2020)] compatible monitor.
HLG(709):
Displays images after adjusting the image quality of the monitor or viewfinder to a quality that is almost the same as when images are displayed on an [HLG(709)] compatible monitor.

Hint

  • If you assign [Gamma Disp. Assist Typ.] to a desired key using [Custom Key Setting] or [Custom Key Setting], you can switch the [Gamma Disp. Assist Typ.] setting each time you press the assigned key.

Note

  • When [Gamma Display Assist] is set to [Auto] during playback, an effect is applied to the image as follows:
    • When playing back a movie recorded with [HLG], [HLG1], [HLG2], or [HLG3]: Displays the image with an [HLG(BT.2020)] or [HLG(709)] effect depending on the color mode.
    • When playing back an HLG still image shot with [HLG Still Image] set to [On]: Displays the image with an [HLG(BT.2020)] effect.
    • When playing back a RAW movie output to another device connected via HDMI: Displays the image with an [S-Log3→709(800%)] effect.
    In other situations, movies are displayed according to the gamma setting and color mode setting in [Picture Profile].
Go to Page Top