Outputting a test tone from each speaker (TEST TONE)

You can output a test tone from each speaker in sequence.

This operation is only available using the display panel on the front of the receiver.

  1. Press AMP MENU.
  2. Select [<LEVEL>] - [TEST TONE] on the display panel.
  3. Select the setting you want.
    • OFF
    • AUTO XXX (*): The test tone is output from each speaker in sequence.

    * XXX represents a speaker channel (FL, CNT, FR, SR, SBR, SB, SBL, SL, LH, RH, SW)

  4. Select the speaker on the screen for which you want to adjust the speaker level.
  5. Adjust the speaker level.


  • To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the receiver.
  • The adjusted value is shown on the display panel during adjustment.