Outputting a test tone from each speaker (Test Tone)
You can output a test tone from each speaker in sequence.
- Select [Setup] - [Speaker Settings] from the home menu.
- Select [Test Tone].
- Select the setting you want.
- Off
- Auto: The test tone is output from each speaker in sequence.
- Front L, Center, Front R, Surround R, Surround L, Sur Back L, Sur Back (*), Sur Back R, Front High L, Front High R, Subwoofer: You can select which speakers will output the test tone.
* [Sur Back] appears when only one surround back speaker is connected.
- Adjust the speaker level.
Note
- This function is not available when [Bluetooth Mode] is set to [Transmitter].
Hint
- To adjust the level of all speakers at the same time, press
+/–. You can also use MASTER VOLUME on the receiver. - The adjusted value is shown on the TV screen during adjustment.
To output a test tone from adjacent speakers
See “Adjusting the balance between adjacent speakers by outputting a test tone (Phase Noise).”
To output the source sound from adjacent speakers
See “Adjusting the balance between adjacent speakers by outputting a source sound (Phase Audio).”
