Speaker configuration and speaker pattern settings
Select the speaker pattern using [Speaker Pattern] in the [Speaker Settings] menu according to the speaker configuration which you are using.
| Speaker configuration in each zone | [Surround Back Speaker Assign] (*2) | [Surround Speaker Assign] | Speaker pattern to be selected in [Speaker Settings] | ||
|---|---|---|---|---|---|
| Main zone | Zone 2 (*1) | Zone 3 | |||
| 5.1-channel | Not used | Not used | [Off] | [Off] | [5.1] |
| 7.1-channel using surround back speakers | Not used | Not used | [Off] | [Off] | [7.1] |
| 7.1-channel using front high speakers | Not used | Not used | [Off] | [Off] | [7.1 (FH)] |
| 5.1-channel with Zone 2 connection | 2-channel | Not used | [Off] | [Off] | [5.1] |
| 3.1-channel with Zone 2 and Zone 3 connections | 2-channel | 2-channel | [Off] | [Zone3] | [3.1] |
| 5.1-channel with bi-amplifier connection | Not used | Not used | [Bi-Amp] | [Off] | [5.1] |
| 5.1-channel with front B speaker connection | Not used | Not used | [Front B] | [Off] | [5.1] |
*1 You can only enable the SPEAKERS ZONE 2 terminals if you set [SURROUND BACK/ZONE2 Priority] to [ZONE2 Terminals] in the [Speaker Settings] menu, and set [Zone2 Power] to [On] in the [Zone Controls] menu.
*2 You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and front high speakers.
Note
- When you use wireless surround speakers, the speaker configuration is fixed to 5.1-channel. To enjoy 5.1-channel with the wireless surround speakers, connect the front speakers, center speaker and subwoofer. For connection of these speakers, see “Connecting 5.1-channel speaker system.”
To setup the wireless surround function, see “Enjoying surround sound using wireless speakers (Wireless Surround Settings).”
