Message Lists
Warning messages
Messages | Meaning/Solution |
---|---|
High temp.! Light off in 1 min. |
|
Frequency is out of range! | Frequency of the input signal is out of range. Input a signal within the acceptable frequency range of the unit. |
Projector temperature is high. High Altitude Mode will change. Set it properly, if Projector is being used at high altitude. |
When using the unit in a location at a high altitude, appropriately set [High Altitude Mode]. When the temperature inside the unit remains high, [High Altitude Mode] is switched to [Level 2] in 1 minute, then the fan rotation speed increases. |
Power Saving Mode is set. Projector will automatically enter Standby Mode in 1 minute. |
[Power Saving] is set to [Standby]. If no signal is input, the power turns off after 1 minute, then the unit goes into standby mode. |
Caution messages
Messages | Meaning/Solution |
---|---|
|
No signal is input in the selected input terminal. Check connections. |
Not applicable! |
The operation to be activated by the button is currently prohibited. Press the appropriate button. |
Settings Lock enabled. |
[Settings Lock] is set to [Level A] or [Level B]. |