Operation With the Remote Control RM-PJ24
This help guide explains the operations using the remote control RM-PJ29.
If you are using the remote control RM-PJ24, some operations are different. For the differences, see the table below.
| Operation | RM-PJ29 | RM-PJ24 |
|---|---|---|
| Confirmation | Press the ENTER button. | Press the
(Enter) button. |
| Power On | Press the
(On) button. |
Press the
/
(On/Standby) button. |
| Power Off | Press the
(Standby) button. |
Press the
/
(On/Standby) button twice. |
| Input selection | Press the INPUT button repeatedly, or press the A to E button. | Press the INPUT button repeatedly. |
| Menu Operation: Calib. Preset | Set from the menu. | Set from the menu or by pressing the CALIBRATED PRESET button. |
| Menu Operation: Laser Light Setting | Set from the menu or by pressing the LIGHT OUTPUT button. | Set from the menu. |
| Menu Operation: Color Temp. | Set from the menu. | Set from the menu or by pressing the COLOR TEMP button. |
| Menu Operation: Sharpness | Set from the menu. | Set from the menu or by pressing the SHARPNESS button. |
| Menu Operation: Gamma Correction | Set from the menu. | Set from the menu or by pressing the GAMMA CORRECTION button. |
| Menu Operation: Color Space | Set from the menu. | Set from the menu or by pressing the COLOR SPACE button. |
| Menu Operation: Aspect | Set from the menu. | Set from the menu or by pressing the ASPECT button. |
| Menu Operation: 3D Settings | Set from the menu. | Set from the menu or by pressing the 3D button. |
| Menu Operation: ID Mode | Select from [All]/[1]/[2]/[3]/[4] according to the setting of the ID MODE switch on the remote control. | Set to [All] or [1], as the remote control has no ID MODE switch and the ID is fixed to [1]. |
