Projecting a High Resolution Image (V Split Display)

Signals transferred after an image is split into two at “4096 × 2160” or “3840 × 2160” resolution are projected.

  1. Connect the DisplayPort 1 input and DisplayPort 2 input on the projector to the DisplayPort 1 output and DisplayPort 2 output on the workstation respectively.
  2. Turn on the projector and workstation.
  3. Select [DisplayPort 1/2] in the input selection window.
  4. Select either “2048 × 2160” or “1920 × 2160” resolution in the setting screen on the workstation*.

    * Depending on the OS and/or graphic boards which are installed in the workstation, user operations on the setting screen differ. Consult with the manufacturer of the workstation or graphic board.

Note

  • When you input signals to DisplayPort 1 and DisplayPort 2, make sure to input the synchronized signals which are output from the same signal system, and input them in the same signal format.
Go to Page Top