Setting Crestron Connected

You can change the control protocol settings of Crestron Connected on the [Crestron Connected] page in [Advanced Settings].

Note

  • The entered value will not be applied until the [Apply] button is clicked.
  1. Select [Advanced Settings] - [Crestron Connected] and display the [Crestron Connected] page.

  2. Set each item and click the [Apply] button.

Settings

[Start Crestron Service]

Turn Crestron Service on or off. For details, refer to the Crestron Corporation product catalog and so on.

[IP Address]

Enter the IP address of the Crestron system server.

[IP ID(HEX)]

Enter the IP ID(HEX) of the CIP protocol.

[Port No.]

Enter the CIP protocol server port number. The factory default setting is “41794.”