Menu Operation: Network Setting

You can configure Internet protocol settings.

  1. Press the MENU button.
  2. Select [Installation] - [Network Setting] - the desired setting.

Settings

[IPv4 Setting]

  • [IP Address Setup]: You can select the IP address setting method.
    • [Auto(DHCP)]: Network settings are automatically assigned by the DHCP server functions such as the router.
    • [Manual]: Network settings are configured manually. Select the desired item with the / (Left/Right) button, and enter the value with the / (Up/Down) button.
      When all items have been entered, select [Apply], then press the ENTER button. The entered settings are applied.
  • [IP Address]: The IP address of the projector is set.
  • [Subnet Mask]: The subnet mask of the projector is set.
  • [Default Gateway]: The default gateway of the projector is set.
  • [MAC Address]: The MAC address of the projector is displayed. This cannot be changed.
  • [Apply]: It enables the IP address that has been set manually.

[IPv6 Information]

The IPv6 address information is displayed. Set the IPv6 address from a web browser.

Go to Page Top