Menu list (on the display panel)

The following options are available in each menu.

Press AMP MENU to display the menu on the display panel.

Auto Calibration settings [<AUTO CAL>]

  • Auto Calibration start [A.CAL START]
  • Auto Calibration type [CAL TYPE] (*1)
    FULL FLAT, ENGINEER, FRONT REF, OFF
  • Calibration Matching [C.MATCH?] (*1)
    C.MATCH?YES, C.MATCH? NO

Level settings [<LEVEL>]

  • Test Tone [TEST TONE] (*2)
    OFF, AUTO XXX (*3), FIX XXX (*3)
  • Test Tone Phase Noise [P. NOISE] (*2)
    OFF, FL/FR, FL/CNT, CNT/FR, FR/SR, SR/SBR, SR/SB, SBR/SBL, SR/SL, SBL/SL, SB/SL, SL/FL, HTL/HTR, FL/SR, SL/FR, FL/HTR, HTL/FR
  • Test Tone Phase Audio [P. AUDIO] (*2)
    OFF, FL/FR, FL/CNT, CNT/FR, FR/SR, SR/SBR, SR/SB, SBR/SBL, SR/SL, SBL/SL, SB/SL, SL/FL, HTL/HTR, FL/SR, SL/FR, FL/HTR, HTL/FR
  • Front left speaker level [FL LEVEL] (*2)
    FL -10.0 dB to FL +10.0 dB (0.5 dB interval)
  • Front right speaker level [FR LEVEL] (*2)
    FR -10.0 dB to FR +10.0 dB (0.5 dB interval)
  • Center speaker level [CNT LEVEL] (*2)
    CNT -10.0 dB to CNT +10.0 dB (0.5 dB interval)
  • Surround left speaker level [SL LEVEL] (*2)
    SL -10.0 dB to SL +10.0 dB (0.5 dB interval)
  • Surround right speaker level [SR LEVEL] (*2)
    SR -10.0 dB to SR +10.0 dB (0.5 dB interval)
  • Surround back speaker level [SB LEVEL] (*2)
    SB -10.0 dB to SB +10.0 dB (0.5 dB interval)
  • Surround back left speaker level [SBL LEVEL] (*2)
    SBL -10.0 dB to SBL +10.0 dB (0.5 dB interval)
  • Surround back right speaker level [SBR LEVEL] (*2)
    SBR -10.0 dB to SBR +10.0 dB (0.5 dB interval)
  • Height left speaker level [HTL LEVEL] (*2)
    HTL -10.0 dB to HTL +10.0 dB (0.5 dB interval)
  • Height right speaker level [HTR LEVEL] (*2)
    HTR -10.0 dB to HTR +10.0 dB (0.5 dB interval)
  • Subwoofer Level [SW LEVEL] (*2)
    SW -10.0 dB to SW +10.0 dB (0.5 dB interval)

Speaker settings [<SPEAKER>]

  • Speaker pattern [SP PATTERN]
    • LISTENER LEVEL: 7.1 to 2.0（16 patterns）
    • HEIGHT/OVERHEAD: SRD, FD, TM, FH, NOT USE（5 patterns）
  • Ceiling Height [CEILING H.] (*4)
    2.00 m to 10.00 m (6’6” to 32’9”) (0.01 m (1 inch) interval)
  • Center Speaker Lift Up [CNT LIFT] (*5)(*6)
    LIFT 1 to LIFT 10, LIFT OFF
  • Surround Speaker Position [SUR SP POS]
    FRONT, BACK
  • Speaker Relocation/Phantom Surround Back [SP RELOCATION]
    TYPE A, TYPE B, OFF
  • Front speakers size [FRT SIZE] (*2)
    LARGE, SMALL
  • Center speaker size [CNT SIZE] (*2)
    LARGE, SMALL
  • Surround speakers size [SUR SIZE] (*2)
    LARGE, SMALL
  • Height speakers size [HT SIZE] (*2)
    LARGE, SMALL
  • SURROUND BACK/ZONE2 Priority [SB/Z2 PRIO] (for USA and Canadian models only)
    ZONE2, SUR BACK
  • Surround Back Speaker Assign [SB ASSIGN] (*7)
    ZONE2 (*8), FRONT B, BI-AMP, OFF
  • Front left speaker distance [FL DIST.] (*2)
    FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.01 m (1 inch) interval)
  • Front right speaker distance [FR DIST.] (*2)
    FR 1.00 m to FR 10.00 m (FR 3’3” to FR 32’9”) (0.01 m (1 inch) interval)
  • Center speaker distance [CNT DIST.] (*2)
    CNT 1.00 m to CNT 10.00 m (CNT 3’3” to CNT 32’9”) (0.01 m (1 inch) interval)
  • Surround left speaker distance [SL DIST.] (*2)
    SL 1.00 m to SL 10.00 m (SL 3’3” to SL 32’9”) (0.01 m (1 inch) interval)
  • Surround right speaker distance [SR DIST.] (*2)
    SR 1.00 m to SR 10.00 m (SR 3’3” to SR 32’9”) (0.01 m (1 inch) interval)
  • Surround back speaker distance [SB DIST.] (*2)
    SB 1.00 m to SB 10.00 m (SB 3’3” to SB 32’9”) (0.01 m (1 inch) interval)
  • Surround back left speaker distance [SBL DIST.] (*2)
    SBL 1.00 m to SBL 10.00 m (SBL 3’3” to SBL 32’9”) (0.01 m (1 inch) interval)
  • Surround back right speaker distance [SBR DIST.] (*2)
    SBR 1.00 m to SBR 10.00 m (SBR 3’3” to SBR 32’9”) (0.01 m (1 inch) interval)
  • Height left speaker distance [HTL DIST.] (*2)
    HTL 1.00 m to HTL 10.00 m (HTL 3’3” to HTL 32’9”) (0.01 m (1 inch) interval)
  • Height right speaker distance [HTR DIST.] (*2)
    HTR 1.00 m to HTR 10.00 m (HTR 3’3” to HTR 32’9”) (0.01 m (1 inch) interval)
  • Subwoofer distance[SW DIST.] (*2)
    SW 1.00 m to SW 10.00 m (SW 3’3” to SW 32’9”) (0.01 m (1 inch) interval)
  • Distance Unit [DIST. UNIT]
    FEET, METER
  • Front speakers crossover frequency [FRT CROSS] (*9)
    CROSS 40 Hz to CROSS 200 Hz (10 Hz interval)
  • Center speaker crossover frequency [CNT CROSS] (*9)
    CROSS 40 Hz to CROSS 200 Hz (10 Hz interval)
  • Surround speakers crossover frequency [SUR CROSS] (*9)
    CROSS 40 Hz to CROSS 200 Hz (10 Hz interval)
  • Height speakers crossover frequency [HT CROSS] (*9)
    CROSS 40 Hz to CROSS 200 Hz (10 Hz interval)

Input settings [<INPUT>]

  • Input Mode [INPUT MODE] (*10)
    AUTO, OPT, COAX, ANALOG
  • Naming inputs [NAME IN]
    For details, see “Changing the name for each input (Name).”
  • Digital audio input assignment [A. ASSIGN]
    OPT, COAX, NONE

EQ settings [<EQ>]

  • Front speakers bass level [FRT BASS]
    FRT B. -10 dB to FRT B. +10 dB (1 dB interval)
  • Front speakers treble level [FRT TREBLE]
    FRT T. -10 dB to FRT T. +10 dB (1 dB interval)
  • Center speaker bass level [CNT BASS]
    CNT B. -10 dB to CNT B. +10 dB (1 dB interval)
  • Center speaker treble level [CNT TREBLE]
    CNT T. -10 dB to CNT T. +10 dB (1 dB interval)
  • Surround speakers bass level [SUR BASS]
    SUR B. -10 dB to SUR B. +10 dB (1 dB interval)
  • Surround speakers treble level [SUR TREBLE]
    SUR T. -10 dB to SUR T. +10 dB (1 dB interval)
  • Height speakers bass level [HT BASS]
    HT B. -10 dB to HT B. +10 dB (1 dB interval)
  • Height speakers treble level [HT TREBLE]
    HT T. -10 dB to HT T. +10 dB (1 dB interval)

Zone settings [<ZONE>]

  • Zone 2 lineout [Z2 LINEOUT]
    VARIABLE, FIXED

Tuner settings [<TUNER>]

Audio settings [<AUDIO>]

  • In-Ceiling Speaker Mode [IN-CEILING]
    FRONT&CNT, FRONT, OFF
  • DSD Native output [DSD NATIVE]
    DSD ON, DSD OFF
  • Digital Legato Linear [D.L.L.]
    D.L.L. AUTO2, D.L.L. AUTO1, D.L.L. OFF
  • Sound Optimizer [OPTIMIZER]
    NORMAL, LOW, OFF
  • Synchronizes audio with video output [A/V SYNC]
    0 ms to 300 ms (10 ms interval), HDMI AUTO
  • Subwoofer Low Pass Filter [SW L.P.F.]
    L.P.F. ON, L.P.F. OFF
  • Digital broadcast language selection [DUAL MONO]
    MAIN/SUB, MAIN, SUB
  • Dynamic Range Compressor [D. RANGE]
    COMP. ON, COMP. AUTO, COMP. OFF
  • DTS:X Decoder mode [NEURAL:X] (*12)
    ON, OFF
  • DTS:X Dialog Control [DIALOG CTL] (*13)
    0 dB to 6 dB (1 dB interval)
  • Multi-room Group Sync [M/R SYNC] (*14)
    ON, OFF

HDMI settings [<HDMI>]

  • HDMI In 4K Scaling [4K SCALING]
    AUTO, OFF
  • Control for HDMI [CTRL: HDMI]
    CTRL ON, CTRL OFF
  • Standby Linked to TV [STBY LINK]
    ON, AUTO, OFF
  • eARC [EARC] (*15)
    ON, OFF
  • Standby Through [STBY THRU]
    ON, AUTO, OFF
  • HDMI Out B Mode [OUTB MODE]
    MAIN, ZONE
  • Priority [PRIORITY] (*16)
    MAIN&ZONE, MAIN ONLY
  • HDMI Audio Out [AUDIO OUT]
    AMP, TV+AMP
  • HDMI Subwoofer Level [SW LEVEL]
    SW AUTO, SW +10 dB, SW 0 dB
  • HDMI Signal Format [SIGNAL FMT.]
    STANDARD, ENHANCED

BLUETOOTH settings [<BT>]

  • BLUETOOTH Mode [BT MODE] (*17)
    RECEIVE, TRANSMIT, OFF
  • BLUETOOTH AAC [BT AAC] (*18)
    AAC ON, AAC OFF
  • BLUETOOTH LDAC [BT LDAC] (*18)
    LDAC ON, LDAC OFF
  • Wireless Playback Quality [QUALITY] (*19)
    AUTO, SOUND, STANDARD, CONNECTION
  • BLUETOOTH Standby [BT STANDBY] (*18)
    STBY ON, STBY OFF

System settings [<SYSTEM>]

  • Remote Start [RM START] (for USA, Canadian and Asia-Pacific models only)
    ON, OFF
  • Auto standby mode [AUTO STBY]
    STBY ON, STBY OFF
  • Network Standby [NET STBY] (for USA, Canadian and Asia-Pacific models only)(*20)
    MODE ON, MODE OFF
  • Version display [VERSION] (*21)
    XXX.X.XXXX
  • Sleep timer [SLEEP]
    OFF, 0:30:00, 1:00:00, 1:30:00, 2:00:00

*1 You can select this setting only when you have performed Auto Calibration and saved the settings.

*2 Some parameters or settings may not be available depending on the speaker pattern setting.

*3 XXX represents a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, HTL, HTR, SW).

*4 You cannot select this setting in the following cases:

  • Headphones are connected.
  • [Bluetooth Mode] is set to [Transmitter].

*5 You can only select this setting if [SP PATTERN] is set to a pattern with center speaker and front high speakers. (i.e. 5.1.2 (FH))

*6 You cannot select this setting in the following cases:

  • Headphones are connected.
  • [2ch Stereo] or [Multi Ch Stereo] is being used.
  • A sound field for music is being used.
  • [Bluetooth Mode] is set to [Transmitter].

*7 You can only select this setting if [SP PATTERN] is not set to a pattern with surround back and height speakers. (i.e. 5.1, 5.0, 4.1, 4.0, 3.1, 3.0, 2.1, 2.0)

*8 For European and Asia-Pacific models only

*9 You can only select this setting if the speaker is set to [SMALL].

*10 Sometimes the settings are dimmed and cannot be selected.

*11 This setting appears dimmed and cannot be selected except when [FM TUNER] is selected.

*12 You cannot select this setting in the following cases:

  • [2ch Stereo], [Direct], [Dolby Surround] or [Neural:X] is being used.
  • Headphones are connected.

*13 You can select this setting only when DTS:X content compatible with the DTS:X Dialog Control function is being played back.

*14 You can select this setting only when listening to sound from one of the following sources using the Wireless Multi-Room function:

  • Devices connected to the HDMI IN, OPTICAL IN, COAXIAL IN, or AUDIO IN jacks
  • TVs compatible with the eARC or ARC function and connected to the HDMI OUT A (TV) jack

*15 You can only select this setting when [Input Mode] for the TV input is set to [Auto].

*16 You cannot select this setting when [HDMI Out B Mode] is set to [Main].

*17 You cannot select this setting when [Bluetooth] function is selected.

*18 You cannot select this setting in the following cases:

  • [Bluetooth Mode] is set to [Off].
  • A BLUETOOTH device is connected.

*19 You can only select this setting when [Bluetooth Mode] is set to [Transmitter] and [Bluetooth Codec - LDAC] is set to [On].

*20 If you agree to use the Chromecast built-in function, this setting automatically switches to [MODE ON].

*21 XXXX represents the version number.

Go to Page Top