[Audio Input]

Sets audio input settings.

Item Sub-item setting Factory default Description
[AUDIO IN 1 Select] [MIC] / [LINE] [MIC] Selects the type of device connected to the AUDIO IN 1 connector.
[AUDIO IN 2 Select] [MIC] / [LINE] [MIC] Selects the type of device connected to the AUDIO IN 2 connector.
[AUDIO IN 1 MIC +48V] [On] / [Off] [Off] Displays the enable/disable state of the +48 V phantom power supply of the device connected to the AUDIO IN 1 connector.
[AUDIO IN 2 MIC +48V] [On] / [Off] [Off] Displays the enable/disable state of the +48 V phantom power supply of the device connected to the AUDIO IN 2 connector.
[CH1 Input Select] [AUDIO IN 1] / [MIC (L)] [AUDIO IN 1] Switches the input source for recording on channel 1.
[CH2 Input Select] [AUDIO IN 1] / [AUDIO IN 2] / [MIC (R)] [AUDIO IN 2] Switches the input source for recording on channel 2.
[CH3 Input Select] [Off] / [AUDIO IN 1] / [MIC (L)] [AUDIO IN 1] Switches the input source for recording on channel 3.
[CH4 Input Select] [Off] / [AUDIO IN 1] / [AUDIO IN 2] / [MIC (R)] [AUDIO IN 2] Switches the input source for recording on channel 4.
[AUDIO IN CH1 MIC Ref.] −80dB / −70dB / −60dB / −50dB / −40dB / −30dB −50dB Sets the reference recording level for XLR microphone input from AUDIO IN CH1.
[AUDIO IN CH2 MIC Ref.] −80dB / −70dB / −60dB / −50dB / −40dB / −30dB −50dB Sets the reference recording level for XLR microphone input from AUDIO IN CH2.
[Line Input Reference] +4dB / 0dB / −3dB / EBUL +4dB Selects the reference input level when [AUDIO IN 1 Select] or [AUDIO IN 2 Select] is set to [LINE].
[Reference Level] −20dB / −18dB / −16dB / −12dB / [EBUL] −20dB Selects the recording level of the 1 kHz reference tone signal.
[CH1 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for channel 1 recording.
[CH2 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for channel 2 recording.
[CH3 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for channel 3 recording.
[CH4 Wind Filter] [On] / [Off] [Off] Enables/disables the wind reduction filter for channel 4 recording.
[CH1 Level Control] [Auto] / [Manual] [Auto] Selects audio input level automatic adjustment or manual adjustment for recording channel 1.
[CH2 Level Control] [Auto] / [Manual] [Auto] Selects audio input level automatic adjustment or manual adjustment for recording channel 2.
[CH3 Level Control] [Auto] / [Manual] [Auto] Selects audio input level automatic adjustment or manual adjustment for recording channel 3.
[CH4 Level Control] [Auto] / [Manual] [Auto] Selects audio input level automatic adjustment or manual adjustment for recording channel 4.
[CH1 Input Level] 0 to 99 49 Sets the input level for recording channel 1.
[CH2 Input Level] 0 to 99 49 Sets the input level for recording channel 2.
[CH3 Input Level] 0 to 99 49 Sets the input level for recording channel 3.
[CH4 Input Level] 0 to 99 49 Sets the input level for recording channel 4.
[Master Input Level] 0 to 99 99 Sets the master audio input level.
[Limiter Mode] [Off] / −6dB / −9dB / −12dB / −15dB / −17dB [Off] Selects the limiter characteristic for large input signals when adjusting the audio input level manually.
[CH1&2 AGC Mode] [Mono] / [Stereo] [Stereo] Sets the auto level adjustment mode for recording channel 1 and channel 2. When set to Stereo, the AGC is linked between channels.
[CH3&4 AGC Mode] [Mono] / [Stereo] [Stereo] Sets the auto level adjustment mode for recording channel 3 and channel 4. When set to Stereo, the AGC is linked between channels.
[AGC Spec] −6dB / −9dB / −12dB / −15dB / −17dB −6dB Selects the AGC characteristic.
[1kHz Tone on Color Bars] [On] / [Off] [Off] Turns the 1 kHz reference tone signal on/off when displaying color bars.

Note

  • When set to [On], the 1 kHz reference tone signal is set for recording on channel 3 and channel 4, even if [CH3 Input Select] and [CH4 Input Select] are set to [Off].
Go to Page Top
 
TP1001804630