[Stream]
Sets streaming settings (see “About Streaming”).
[Stream Setting]
Sets settings related to the streaming protocol.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Setting] | [RTSP] / [RTMP] / [SRT-Caller] / [SRT-Listener] / [NDI|HX] / [Off] | [RTSP] | Selects the streaming protocol. |
Note
- To use RTMP, set [Stream] – [Audio Stream] – [Setting] to [On] beforehand.
[RTSP]
The following items are displayed when [Stream Setting] is set to [RTSP].
Sets settings related to RTSP streaming.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Port Number] | 554, 1024 to 65534 | 554 | Sets the RTSP port number. |
| [Time Out] | 0 to 600 | 60 | Sets the timeout of the Keep Alive command for RTSP streaming. |
| [Authentication] | [On] / [Off] | [On] | Turns the RTSP authentication function on/off. |
| [Video Port Number 1] | 1024 to 65534 | 51000 | Sets the port number for sending video 1 for RTSP unicast streaming. |
| [Video Port Number 2] | 1024 to 65534 | 53000 | Sets the port number for sending video 2 for RTSP unicast streaming. |
| [Audio Port Number] | 1024 to 65534 | 57000 | Sets the port number for sending audio for RTSP unicast streaming. |
[RTMP]
The following items are displayed when [Stream Setting] is set to [RTMP].
Sets settings related to RTMP streaming.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Server URL] | – | – | Sets the RTMP or RTMPS connection destination URL. |
| [Stream Key] | – | – | Sets the stream key obtained from the RTMP server side. |
| [Root Certificate] | – | – | Loads the root certificate required for connection with the RTMP server. Press the [Load] button and select a root certificate on the displayed screen. Press the [Delete] button to delete the loaded root certificate. The status is displayed in [Root Certificate Status]. |
[SRT]
The following items are displayed when [Stream Setting] is set to [SRT-Caller] or [SRT-Listener].
Sets settings related to SRT streaming.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Destination] | – | – | Sets the connection destination URL when the unit is operating as a caller. |
| [Port Number] | 1024 to 65534 | 4201 | Sets the port number for listening when the unit is operating as a listener. |
| [Latency] | 20 to 8000 ms | 120 | Sets the latency. |
| [TTL] | 1 to 255 | 64 | Sets the TTL value. |
| [Encryption] | [Off] / [AES128] / [AES256] | [Off] | Enables/disables encryption and sets the encryption method. |
| [Passphrase] | 0 or string of 10 to 79 characters | 0 | Sets the passphrase used for encryption. Press [Clear] to clear the entered passphrase. |
| [ARC] | [On] / [Off] | [On] | Turns the Adaptive Rate Control function on/off. |
NDI|HX
The following items are displayed when [Stream Setting] is set to [NDI|HX].
Sets settings related to NDI|HX.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Source Name] | – | – | Displays the NDI source name. |
| [Group] | [On] / [Off] | [Off] | Turns the NDI grouping function on/off. |
| [Group Name] | – | – | Displayed when the NDI grouping function is set to [On]. Sets the group name. |
| [Discovery Server 1] | – | – | Sets NDI discovery server 1. |
| [Discovery Server 2] | – | – | Sets NDI discovery server 2. |
| [Multicast Mode] | [On] / [Off] | [Off] | Turns multicast streaming on/off. |
| [Multicast Prefix] | 239.255.0.0 | 239.255.0.0 | Displayed when [Multicast Mode] is set to [On]. Sets the prefix to use for multicast streaming. |
| [Multicast Netmask] | 255.255.0.0 | 255.255.0.0 | Displayed when [Multicast Mode] is set to [On]. Sets the netmask that determines the multicast address range. |
| [Multicast TTL] | 1 to 256 | 3 | Displayed when [Multicast Mode] is set to [On]. Sets the TTL value for multicast streaming. |
| [Multi-TCP Mode] | [On] / [Off] | [Off] | Turns Multi-TCP mode on/off. |
| [Unicast UDP Mode] | [On] / [Off] | [On] | Turns Unicast UDP mode on/off. |
TP1001804688
