Adjusting Manually in Variable Mode

You can perform manual exposure adjustment using the ND filter.

  1. Set [Shooting] – [ND Filter] – [Mode] to [Variable] in the camera menu.
  2. Press the [ND Filter] button in the camera basic configuration panel.

    The frame of the [ND Filter] button changes to orange.

    The ND Filter adjustment panel appears.

  3. Press the [ND Filter] button and select [Manual] from the list.

  4. Adjust the transmittance of the ND filter using the [ND Filter] slider or [ND Filter] adjustment buttons.

    Hint

    • The slider and adjustment button settings are linked.
    • You can also adjust the ND filter on the (Main) tab in the camera control panel.

To temporarily adjust automatically

You can assign [Push Auto ND] to an assignable button, and temporarily turn auto ND filter on while the button is pressed. Releasing the button sets auto ND filter back to off.

Set the ND filter to [Manual].

Note

  • When the ND filter is switched to or from [Clear] during shooting, the ND filter frame is displayed on the image and an operating sound is emitted.

Hint

  • You can also assign [ND Filter Position] to an assignable button, and press the button to switch between [Manual] and [Clear].
  • You can also press the [Push Auto] button on the ND Filter adjustment panel to turn auto ND filter on while the button is pressed.
Go to Page Top
 
TP1001804540