Color Video CameraBRC-AM7

This topic describes the location and function of parts of the infrared remote control (supplied).

1. REC● (record START/STOP) button

   Press to start or stop recording.

2. MENU button

   Press to show or hide the camera menu.

3. GUI control buttons

   Press to perform operations in the camera menu, in message dialogs that include buttons, and other screen display functions.

4. CANC./BACK button

   Press to cancel a setting or to return to the previous screen of the camera menu of the unit.

5. Pan and tilt control buttons

   Press the arrow buttons to control the pan/tilt of the camera. Press the HOME button to return the orientation of the camera to face the front.

6. Preset position control buttons

   Press and hold the PRESET button and press one of the 1 to 3 buttons to store camera direction, zoom, and focus adjustment status in the pressed number button.

   Press a number button with stored settings to recall the saved state.

7. Focus control buttons

   Use to adjust the focus.

   To adjust the focus automatically, press the AF button.

   To adjust the focus manually, press the MF button, then press either the F (Far) button to focus on far subjects or the N (Near) button to focus on near subjects.

8. Assignable buttons 1 to 3

   Executes the functions assigned to the assignable buttons using the camera menu.

   If you assign the [Direct Menu] function to an assignable button, you can adjust the exposure, white balance, and other settings using the GUI control buttons.

   • For details about assignment using the camera menu, see “Assignable Buttons.”
   • For details about the direct menu, see “Direct Menu Operation.”

9. PTZ AUTO FRAMING button

   ON button: Executes PTZ auto framing.

   OFF button: Stops PTZ auto framing.

   FUNC.: Not used on the unit.

10. (power) button

    Press to turn on the unit from standby state or to switch the power supply to standby state.

11. THUMBNAIL button

    Displays the thumbnail screen showing the clips recorded on the memory card of the unit.

    • For details about the thumbnail screen, see “Thumbnail Screen.”

    You can select clips and control playback on the thumbnail screen using the GUI control buttons.

12. SLOT SEL (memory card slot (A)/(B) select) button

    When two memory cards are inserted, press the button to switch between the memory cards for recording.

    Press this button while the thumbnail screen is displayed to switch between the memory cards to view.

13. P/T RESET (pan/tilt reset) button

    Resets the pan/tilt functions. Press the button when the POWER lamp and NETWORK lamp are blinking simultaneously or when [Execute Pan-Tilt Reset] is displayed in the framing control panel in the Web App.

14. Zoom control buttons

    To zoom in, press the T (telephoto) button.

    To zoom out, press the W (wide) button.

15. CAMERA SELECT switch

    Selects the ID of the camera (this unit) for control by an infrared remote control. The ID of the camera is set using CAMERA SETUP switches 1 and 2 on the connector block.

    Note

    • If another camera with same ID is positioned nearby, it may also respond to operations from the supplied infrared remote control. If cameras are positioned close together, it is recommended that different IDs be configured.

Infrared remote control battery

The infrared remote control requires two AA (LR6) batteries.

Insert the batteries into the infrared remote control as shown in the following diagram.