[Tally]
Sets recording/tally lamp settings (see “Connecting a Tally Signal”).
[Tally]
Sets settings related to the recording/tally lamp.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Tally Lamp Brightness] | [High] / [Low] / [Off] | [High] | Sets the brightness of the recording/tally lamp. |
| [G Tally Lamp] | [Enable] / [Disable] | [Enable] | Enables/disables the G (green) tally lamp. |
| [Y Tally Lamp] | [Enable] / [Disable] | [Enable] | Enables/disables the Y (yellow) tally lamp. |
| [Tally Control] | [External] / [Internal] / [PTZ AFR] | [Internal] | Selects the target for accepting the recording/tally lamp control information of the unit. |
[TSL UMD]
Sets the tally control method using the TSL UMD protocol.
| Item | Sub-item setting | Factory default | Description |
|---|---|---|---|
| [Setting] | [On] / [Off] | [Off] | Enables/disables tally control using the TSL UMD protocol. |
| [Index] | 0 to 65534 | 1 | Sets the index number for receiving tally control using the TSL UMD protocol. |
| [Port Number] | 1024 to 65534 | 8900 | Sets the port number for receiving tally control using the TSL UMD protocol. |
TP1001804676
