Adjusting the Shooting Direction Using the Supplied Infrared Remote Control

You can adjust the shooting direction using the pan/tilt operation buttons of the supplied infrared remote control.

  1. Press the arrow buttons to control the pan/tilt.

    Press the arrow button of the direction you want to view while monitoring the camera image.

    To move a short distance, press the arrow button briefly.

    To move a large distance, press and hold the arrow button.

    To move diagonally, press and hold the (up arrow) or (down arrow) button and press the (left arrow) or (right arrow) button.

To face the camera back to the front

Press the HOME button.

Note

  • Depending on the direction of the camera and the zoom position, part of the unit or cables connected to the connector block may be visible. Before shooting, check the range that will be captured. You can also control the pan/tilt range using [Pan-Tilt] – [P/T Range Limit] in the web menu. When the unit is turned on or pan/tilt reset is executed, this range limit setting is ignored. For details, see [Pan-Tilt] – [P/T Range Limit] in the web menu.
Go to Page Top
 
TP1001804496