Specifications
General
Mass
- Approx. 3.5 kg (7 lb 11 oz)
Dimensions
See “External dimensions.”
Power requirements
- 12 V DC (XLR 4-pin)
- PoE++ (IEEE802.3bt, Type 4, Class 8 compliant)
Power consumption
- 132 W (max) with DC IN supply
- PoE++: 71.3 W (max)
Operating temperature
- 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
- –20 °C to +60 °C (–4 °F to +140 °F)
Recording format (video)
- XAVC HS Long 422/420
- XAVC S Long 422/420
- XAVC S-I Intra
Recording format (audio)
- LPCM 24-bit, 48 kHz, 4-channel
Recording frame rate
- XAVC HS Long 422/420
3840×2160/119.88P*, 100P*, 59.94P, 50P, 23.98P - XAVC S Long 422/420
3840×2160/119.88P*, 100P*, 59.94P, 50P, 29.97P, 25P, 23.98P
1920×1080/119.88P*, 100P*, 59.94P, 50P, 29.97P, 25P, 23.98P - XAVC S Intra
3840×2160/59.94P, 50P, 29.97P, 25P, 23.98P
1920×1080/59.94P, 50P, 29.97P, 25P, 23.98P
* When Slow & Quick Motion is turned on, 119.88P and 100P cannot be used.
Recording/playback time
- XAVC HS Long 420
3840×2160/59.94P
Approx. 80 minutes (using CEA-G160T) - XAVC S Long 420
3840×2160/59.94P
Approx. 80 minutes (using CEA-G160T)
1920×1080/59.94P
Approx. 270 minutes (using CEA-G160T) - XAVC S Intra
3840×2160/59.94P
Approx. 25 minutes (using CEA-G160T)
1920×1080/59.94P
Approx. 75 minutes (using CEA-G160T)
Note
- The recording/playback time may vary due to usage conditions and memory characteristics. The recording and playback times are for a continuous recording as a single clip. The actual times may be shorter, depending on the number of clips recorded.
Pan/tilt drive section
- Pan drive range/speed: ±175°, 0.004 °/sec to 180 °/sec
- Tilt drive range/speed: −30° to 210°, 0.004 °/sec to 180 °/sec
- Noise criterion rating: NC25 or lower
- Number of preset positions: 100
The number of available preset positions will vary depending on the remote that is used (web application: 100, RM-IP500: 100, supplied infrared remote control: 3)
Camera section
Imaging device
- 1.0 inch ExmorRS CMOS image sensor
Number of pixels
- Approx. 14 megapixels (total pixels)
Auto focus
- Detection method: Phase detection/contrast detection
Internal ND filters
- [Clear]: None
- 1: 1/4ND
- 2: 1/16ND
- 3: 1/64ND
- Linearly variable ND: 1/4ND to 1/128ND
Shutter speed
- 64 frames to 1/8000 sec (23.98P)
Shutter angle
- 5.6° to 360°, 2 to 64 frames
Slow & Quick Motion
- XAVC S QFHD: 1 fps to 120 fps
- XAVC S HD: 1 fps to 240 fps
White balance
- 2000 K to 15000 K
Gain
- –3 dB to +36 dB (1 dB increments)
Base look
- [S-Cinetone], [ITU709], [709tone], [s709], [709(800%)], [S-Log3], [HLG Live], [HLG Mild], [HLG Natural]
Lens section
- Zoom ratio: Optical 20×, Digital 30× (4K resolution) / 40× (Full HD resolution)
- Focal length: f = 24 mm to 480 mm (35 mm equivalent)
- F-number: F2.8 (wide) to F4.5 (telephoto)
- Horizontal angle of view: Approx. 75°
- Minimum shooting distance: 10 mm
Audio section
Sampling frequency
- 48 kHz
Quantization
- 24-bit
Frequency response
- XLR input MIC mode: 20 Hz to 20 kHz (±3 dB or less)
- XLR input LINE mode: 20 Hz to 20 kHz (±3 dB or less)
Dynamic range
- XLR input MIC mode: 80 dB (Typical)
- XLR input LINE mode: 90 dB (Typical)
Distortion
- XLR input MIC mode: 0.08% or lower (–40 dBu input level)
- XLR input LINE mode: 0.08% or lower (+14 dBu input level)
Input/output section
Inputs
DC IN connector
- XLR 4-pin, 11 to 17 V, 12 A (max)
AUDIO IN connector
- AUDIO IN 1 / AUDIO IN 2: XLR 3-pin × 2, female
LINE / MIC / MIC+48V switchable
MIC: Reference –30 dBu to –80 dBu
- MIC: ø3.5 mm stereo mini jack, plug-in power compatible
GENLOCK IN connector
- BNC connector, 1.0 Vp-p, 75 Ω
TC IN connector
- BNC connector
Outputs
SDI OUT 1 (12G) connector / SDI OUT 2 connector
- SDI OUT 1 (12G): 12G-SDI output BNC type, 12G-SDI / 6G-SDI / 3G-SDI (Level A/B) / HD-SDI
- SDI OUT 2: 3G-SDI output BNC type, 3G-SDI (Level A) / HD-SDI
HDMI connector
- Type-A connector
OPTICAL output connector
- SFP+ compliant
* The same signal as the 12G-SDI output connector is output. The unit does not support optical signal input.
Input/output
LAN (network) connector
- RJ-45, 1000BASE-T
OPTION connector
- RJ-45 tally input/output connector
VISCA IN connector / VISCA OUT connector
- Control protocol: VISCA RS-422
Media slot section
- CFexpress Type A / SD card slot (2)
Supplied accessories
- Infrared remote control (1)
- QR code seal (1)
- Safety Regulations (2)
- Warranty booklet (1)
- Ceiling bracket (A) (1)
- Ceiling bracket (B) (1)
- Fall prevention wire rope (1)
- +PSW M3×8 screws (6)
- +PSW M4×8 stainless steel screw for fall prevention wire rope (1)
External dimensions
Dimensions are approximate values.
Unit: mm (inches)
Camera body
Ceiling bracket (B)
Design and specifications are subject to change without notice.
TP1001804724