Adjusting the White Balance Manually

You can adjust the white balance manually.

  1. Press the [White Balance] button in the camera basic configuration panel.

    The frame of the [White Balance] button changes to orange.

    The White Balance adjustment panel appears.

  2. Press the [White Mode] button and select one of the following from the list.

    [Memory A (T/T)]

    [Memory A (R/B)]

    [Preset]

  3. Adjust the white balance using the sliders or adjustment buttons.

    Hint

    • The slider and adjustment button settings are linked.
    • The difference between [Memory A (T/T)] and [Memory A (R/B)] is that the axis of adjustment is different, but the adjustment results are linked.

    For [Memory A (T/T)]

    This mode adjusts the white balance saved in memory A by adjusting the color temperature (Temp) and Tint.

    You can set the color temperature in 20 K increments in the range 2000 K to 5600 K. Values above 5600 K can be set at intervals equal to the amount of color change (mired) from 5580 K to 5600 K.

    Pressing the [Reset] button on the right side of [Temp] or [Tint] restores the corresponding setting to the default value.

    For [Memory A (R/B)]

    This mode adjusts the white balance saved in memory A by adjusting the [R Gain] and [B Gain].

    Pressing the [Reset] button restores the corresponding gain setting to the default value.

    For [Preset]

    This mode adjusts the color temperature to a preset value.

    You can set the value in 100 K increments.

    In preset mode, you can also assign [Preset White Select] to an assignable button, and press the button to change to a preconfigured preset value.

    [Custom]: 3200 K → 4300 K → 5600 K → 6300 K → 3200 K…

    [Flexible ISO]: 3200 K → 4300 K → 5500 K → 3200 K…

Go to Page Top
 
TP1001804543