[P/T Preset]

Sets settings related to camera presets.

[Pan-Tilt]

Sets the pan/tilt speed for presets.

Item Sub-item setting Factory default value Description
[Speed Setting Way] [Separate] / [Common] [Separate] Sets whether pan/tilt speeds for presets are configured separately or use a common setting.
[Speed Unit*] [Speed Table] / [Time] [Speed Table] Sets the drive speed for presets when a preset is saved to a framing speed table or transition time.
[Speed*] 1 to 127 50 Sets the transition speed for presets when a preset is saved.
[Time*] 1.0 to 99.0 1.0 Sets the transition time for presets when a preset is saved.
[Common Speed] 1 to 127 50 Sets the common speed for presets.

Note

  • A maximum drive speed of 24 is used if a value of 25 or higher is set when [Pan-Tilt] – [P/T Speed] – [Speed Step] is set to [Normal].
[Ramp Curve] 1 to 9 9 Sets the pan/tilt acceleration/deceleration when a preset position is recalled. The larger the number, the higher the acceleration.

[Zoom]

Sets the zoom speed for presets.

Item Sub-item setting Factory default value Description
[Zoom Sync*] [On] / [Off] [On] Sets whether pan/tilt operation and zoom operation are synchronized when restoring a preset position.
[Zoom Speed*] 0 to 32766 32766 Sets the zoom speed.

[Focus]

Sets the focus speed for presets.

Item Sub-item setting Factory default value Description
[Focus Recall*] [On] / [Off] [On] Sets whether focus settings are restored when restoring a preset position.
[MF Speed*] 0 to 32766 32766 Sets the focus speed for manual focus.

Hint

  • Items marked with an asterisk “*” are values that are configured when a preset position is saved.
    You can change the values individually later by pressing the (Preset position menu) button and selecting [Edit…] from the displayed menu in the preset position control panel.
Go to Page Top
 
TP1001804670