Synchronizing the Phase of the Video Signal (Genlock)

You can supply a reference signal to the GENLOCK connector to enable genlock.

The input reference signals that can be used vary depending on the system frequency of the selected recording format.

System frequency of recording format Supported input reference signals
119.88 1920×1080 59.94i
720×486 59.94i
100 1920×1080 50i
720×576 50i
59.94 1920×1080 59.94i
720×486 59.94i
50 1920×1080 50i
720×576 50i
29.97 1920×1080 59.94i
720×486 59.94i
25 1920×1080 50i
720×576 50i
23.98 1920×1080 23.98PsF
1920×1080 23.98P

You can check the external sync status using [Technical] – [Genlock] – [Reference] in the camera menu.

Note

  • If the reference signal is unstable, genlock cannot be achieved.
  • The subcarrier is not synchronized.
Go to Page Top
 
TP1001804708