Registering a File Transfer Destination

You can register a transfer destination server before starting a file transfer.

  1. Select [Network] – [File Transfer] – [Default Upload Server] – [Server Settings1] (or [Server Settings2], [Server Settings3]) in the web menu.

    Hint

    • The name of the selection option will change according to [Display Name] configured in the next step.
  2. Configure the following items for [Network] – [FTP Server 1] to [FTP Server 3] in the web menu.
    Item Description
    [Display Name] Enter the name of the server to display in the transfer job list when selecting a transfer destination server.
    [Service] Displays the server type.
    [FTP]: FTP server
    [Host Name] Enter the address or host name of the server.
    [Port] Enter the port number of the server to connect.
    [User Name] Enter the user name.
    [Password] Enter the password.
    [Passive Mode] Turn passive mode on/off.
    [Destination Directory] Enter the name of the directory on the destination server.

    Note

    • If characters that are invalid on the destination server are entered in [Destination Directory], files will be transferred to the user’s home directory. Invalid characters will vary depending on the server.
    [Using Secure Protocol] Set whether to perform secure FTP transfer.
    [Root Certificate] Load/clear a certificate.
    [Load]: Load a CA certificate. Loads PEM-format certificates.
    [Clear]: Clear the CA certificate.
    [None]: Do not load or clear a certificate.

    Note

    • Set the clock of the unit to the correct time before loading a CA certificate.
    • When recording in 3840×2160P 59.94/50P, [Load] cannot be selected.
    [Root Certificate Status]: Displays the load status of the certificate.
    [Reset]: Resets the [Server Settings] settings to the default values.
Go to Page Top
 
TP1001804570