Attaching landing gear
-
Perform the operations described in “Attaching the damping plate to the aircraft.”
-
Press in the ball detent (
) and insert the landing gear.
Make sure that the ball detent (
) is fully engaged. -
Turn the lever (
) to lock the landing gear.Turn both landing gear levers (
) below the dotted line as shown below.
-
Repeat steps 2 and 3 to attach the other landing gear.
-
Turn the aircraft over.
Holding the aircraft securely by two frame arms (
), turn it over.
To remove the landing gear
-
Remove the top cushioning from the outer box and place it on a flat surface. Holding the aircraft securely by the frame arms, place it upside down on the cushioning.
Be careful to keep the propeller attachment points of each motor off the surface.
-
Turn the landing gear lever (
) to unlock it.
-
Press in the ball detent (
) and remove the landing gear.
-
Turn the landing gear levers (
) until they are positioned in place.When storing the aircraft in the outer box, turn both landing gear levers (
) below the dotted line as shown below.
