Mounting the gimbal GBL-T3 on the aircraft
-
Make sure the aircraft is off.
Confirm that the power status LED (
) on the aircraft is off.
-
Turn the ring (
) until the white circle on the gimbal detach button (
) is aligned with 
(Unlock) (
), and then attach the gimbal straight using the mark (
) on the quick-release as a landmark.
-
Turn the ring () toward
(Lock) (
).Confirm that
(Lock) () and the white circle on the gimbal detach button () are aligned and that the gimbal detach button () has returned to the original position.
To remove the gimbal
-
Make sure the aircraft is off.
-
Hold down the gimbal detach button (
) on the quick-release and turn the ring () toward (Unlock) ().The gimbal will come off the quick-release.
Note
- Hold the gimbal with both hands when removing it. The gimbal or camera may be scratched or damaged if the gimbal rotates or drops.
- Be sure to remove the gimbal after use. Leaving it attached to the aircraft may damage the damping rubber of the damping plate.
